Hostname: page-component-7bb8b95d7b-495rp Total loading time: 0 Render date: 2024-10-01T11:38:37.823Z Has data issue: false hasContentIssue false
  • English
  • Français

Computer Analysis of a-Si:H Based Double Junction Solar Cells

Published online by Cambridge University Press:  15 February 2011

N. Palit  and
P. Chatterjee
N. Palit
Affiliation:
Energy Research Unit, Indian Association for the Cultivation of Science, Calcutta 700 032, INDIA, parsathi @ poly.polytechnique.fr
P. Chatterjee
Affiliation:
Energy Research Unit, Indian Association for the Cultivation of Science, Calcutta 700 032, INDIA, parsathi @ poly.polytechnique.fr
Get access

Abstract

An integrated electrical-optical model has been used to simulate and examine ways of optimising the performance of double junction solar cells, where both the component cells have a-Si:H absorber layers of identical material quality. In the optical modelling part we take into account both specular interference effects; and diffused reflectances and transmittances due to interface roughness. The model simulates carrier transport in the junction between the two p-i-n subcells with the help of a thin heavily defective recombination layer (RL) having a reduced band gap.

Our results reveal that in order to simulate the current-voltage and the quantum efficiency (QE) characteristics of these cells, window losses and light-trapping effects need to be properly accounted for. Results indicate that the highest open-circuit voltage is attained when the majority carrier quasi-Fermi levels on either side of the RL coincide. Also for the highest multijunction cell efficiency the thicknesses of the component subcells are such that the electric field in both are fairly close to one another. Finally, the QE under AM 1.5 bias light at the maximum power point has been shown to be extremely sensitive to thickness variations of the component subcells and hence an useful tool for multijunction cell optimisation.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 467: Symposium A – Amorphous and Microcrystalline Silicon Technology - 1997 , 1997 , 771
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Chatterjee, P., Leblanc, F., Favre, M. and Perrin, J., in Thin Films for Photovoltaic and Related Device Applications, edited by Ginley, D., Catalano, A., Schock, H.W., Eberspacher, C., Peterson, T. M. and Wada, T. (Mater. Res. Soc. Proc. 426, Pittsburgh, PA, 1996) p. 593–598.Google Scholar
2. Hou, J. Y., Arch, J. K., Fonash, S. J., Wiedeman, S. and Bennet, M., in Conference Record of the 19th IEEE Photovoltaic Specialists’ Conference, Las Vegas, Nevada, 1991, p. 1260–5.Google Scholar
3. Chatterjee, Parsathi, J. Appl. Phys. 79, 7339–47 (1996).Google Scholar
4. Leblanc, F., Perrin, J. and Schmitt, J., J. Appl. Phys. 75, 1074–87 (1994).Google Scholar
5. Leblanc, F., Thèse de docteur en science, Université de Paris-Sud Centre d'Orsay, 1992.Google Scholar
6. Hou, J. Y., Fonash, S. J. and Chen, L. F., in Conference Record of the IEEE Photovoltaic Specialists’ Conference, 1993, p. 891–6.Google Scholar
7. Burns, J., Choudhury, M. and Wagemann, H. G. in Conference Record of the 13th European Photovoltaic Solar Energy Conference, Nice, France, 1995, p. 230–3.Google Scholar