No CrossRef data available.
Article contents
Characterization of Ti:LiNbo3 Optical Channel Waveguides Fabricated using Rapid Thermal Annealing
Published online by Cambridge University Press: 21 February 2011
Abstract
Rapid thermal annealing has been used to initiate diffusion of Ti in LiNbO3 for the fabrication of optical waveguides. The sample with the most rapid initial ramp of temperature to 875 C was found to have the lowest propagation loss of 1 dB/cm. In order to more fully understand these channel waveguides, we have utilized Raman microprobe spectroscopy. Preliminary results suggest that the presence of the Ti in the LiNbO3 lattice dramatically alters the Raman response.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1989
References
REFERENCES
1. See, for example, Wilson, S. R., Powell, R., and Davies, D. E., Eds. Rapid Thermal Processing of Electronic Materials, MRS Proceedings, Vol.92 (1987).Google Scholar
2.
Cromer, D. C., De Brabander, G. N., Boyd, J. T., Jackson, H. E., and Sriram, S., Appl. Opt., 28, 33 (1989).Google Scholar
3.
Kaminow, I.P., Johnson, W. D. Jr., Phys. Rev.
160, 519 (1967); A. S. Barker and R. London, Phys. Rev. 158, 433 (1967); S. Chen, Ph. D. thesis, University of Cincinnati (1987), unpublished.Google Scholar