Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-25T18:00:37.886Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of Pore Structure and Hydraulic Property Alteration in Pressurized Unsaturated Flow Tests

Published online by Cambridge University Press:  10 February 2011

B. P. McGrail ,
C. W. Lindenmeier  and
P. F. Martin
B. P. McGrail
Affiliation:
Applied Geology and Geochemistry Department, Pacific Northwest National Laboratory, Richland, Washington 99352, [email protected]
C. W. Lindenmeier
Affiliation:
Applied Geology and Geochemistry Department, Pacific Northwest National Laboratory, Richland, Washington 99352, [email protected]
P. F. Martin
Affiliation:
Applied Geology and Geochemistry Department, Pacific Northwest National Laboratory, Richland, Washington 99352, [email protected]
Get access

Abstract

The pressurized unsaturated flow (PUF) test is a new experimental method for the evaluation of the long-term corrosion behavior of waste forms and other engineered barrier materials. Essentially, the technique provides a means to flow water through a porous bed of test material or materials at elevated temperature and under hydraulically unsaturated conditions. Bulk volumetric content, effluent pH and electrical conductivity are monitored in real time using a computer control and data acquisition system. In previous papers, we have reported on the changes in bulk water content, effluent chemistry, and glass corrosion rates that result from the formation of alteration products during these tests. These measurements are now supplemented through the use of the ultracentrifugation apparatus (UFA) for hydraulic property measurements and highresolution, x-ray microtomography (XMT) to provide 3-D spatial and temporal imaging of water distribution and pore structure alteration during these tests. Quantitative changes in the water retention characteristic were correlated with the onset of zeolite formation in the tests. Extensive alteration of the glass resulted in cementation of the glass grains near the bottom of the column, which was observed in situ using the XMT.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 556: Symposium QQ – Scientific Basis for Nuclear Waste Management XXII , 1999 , 421
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. McGrail, B. P., Lindenmeicin, C. W. Martin, P. F., and Gee, G. W.. 1997. “The Pressuried Unsaturated Flow (PUF) Test: A New Method for Engineered-Barrier Materials Evaluation.” In Transactions of the American Ceramic Society Vol. 72, Jain, V. and Peeler, D. K. (eds ), Colunmbus, Ohio.Google Scholar
2. McGrail, B. P., Martin, P. F., and Lindenmeier, C. W.. 1997, “Accelerated Testing of Waste Forms Using a Novel Pressurized Unsaturated Flow (PUF) Method.” Mat Res, Soc. Symp. Proc. 465:253–260.Google Scholar
3. McGrail, B. P., Martin, P. F., Lindenmeier, C. W., Schaet, H. T. 1998. Corosion Testing of low Activity Waste Glasses: Fiscal Year 1998 Sunmary Reportt PNNL-12014, Pacific Northwest National Laboratory, Richland, Washington.Google Scholar
4. American Society for Testing and Materials. 1995. Standard Test Methods Ior Deternining Chemical Durabihi of Nucleari Waste Glassses: The Product Consistency Test (PCT). Standard C1285-94, Philadelphia, Pennsylvania.Google Scholar
5. McGiral, B. P., Ebert, W. L., Bakel, A. J., and Peeler, D. K.. 1997. “Measurement of Kinetic Rate Law Parameters on a Na-Ca-Al Borosilicate Glass for Low-Activity Waste.” J. Nuc. Mat. 249: 175–189.Google Scholar
6. Mualem, Y. 1976, “A New Model for Predicting the Htydraulic Conductsvity of Unsaturated Porous Media.” Water Resour. Res. 12(3):513–522.Google Scholar