Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-23T07:50:38.509Z Has data issue: false hasContentIssue false
  • English
  • Français

Application of Electrochemical Acceleration Test Method to Changes in Cementitious Barrier Performances by Leaching Degradation

Published online by Cambridge University Press:  10 February 2011

H. Saito ,
T. Tajima ,
A. Fujiwara  and
Y. Tsuji
H. Saito
Affiliation:
OBAYASHI Corporation Technical Research Institute, 4-640 Shimokiyoto, Kiyose-shi, Tokyo 204, JAPAN
T. Tajima
Affiliation:
OBAYASHI Corporation Technical Research Institute, 4-640 Shimokiyoto, Kiyose-shi, Tokyo 204, JAPAN
A. Fujiwara
Affiliation:
Radioactive Waste Management Center, 2-8-10 Toranomon Minato-ku, Tokyo 105, JAPAN
Y. Tsuji
Affiliation:
Department of Civil Engineering Gunma University, 1-5-1 Tenjinchou, Kiryu-shi, Gunma Pref. 376, JAPAN
Get access

Abstract

Since cementitious materials used in repositories will be in contact with water, one of the most important tasks is to assess their long-term performance while they are being degraded very slowly by leaching. The authors have proposed an electrochemical acceleration test method and clarified its applicability. In this method, a specimen is placed between two glass vessels containing water. An anode and a cathode connected to a DC power source provide a potential gradient across the specimen. Ca2+ ions in the pore solution move rapidly to the cathode side, and thus hasten cement hydrate dissolution.

In this study, we obtained two types of almost homogeneously degraded specimens by controlling cumulative quantity of dissolved Ca2+ ions. In the first type, there was no Ca(OH)2and the C-S-H phases underwent insignificant alteration, whereas in the second type, degradation of the C-S-H phases occurred.

As a preliminary evaluation of cementitious materials, diffusion coefficients of tritiated water were measured for nondegraded and degraded specimens. Diffusion coefficients were increased by degradation and closely corresponded to changes in porosity.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 506: Symposium – Scientific Basis for Nuclear Waste Management XXI , 1997 , 449
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Saito, H., Nakane, S., Ikari, S. and Fujiwara, A., Nuclear Engineering and Design, Vol. 138, No. 2, 1992, pp.151–155 Google Scholar
2 Nakane, S. and Saito, H., in Integrated Design and Environmental Issues in Concrete Technology, edited by Sakai, K., E & FN Spon, 2-6 Boundary Row, London,1996, pp.69–82 Google Scholar
3 Gerard, B, thèse de doctorat ENS Cachan/Univ. Laval-Québec, 1996,Google Scholar
4 Wittmann, F.H. and Gerdes, A, International zeitschrift für, Bauinstandsetzen, 2, jahrgang, Helft, 6., 1996,Google Scholar
5 Murrinen, A., Penttila-Hiltunen, P. and Uusheimo, K., in Scientific basis for Nuclear Waste Management XII, edited by Lutze, W., Ewing, R.C. (Mater. Res. Soc. Symp. Proc. 127, Boston, 1989), pp.743–748 Google Scholar