Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-07T21:14:41.515Z Has data issue: false hasContentIssue false
  • English
  • Français

An Evaluation of the Creep Properties of an Al2O3/Ni3A1 Composite and the Effect of Disorder on Mechanical Properties

Published online by Cambridge University Press:  15 February 2011

P. C. Brennan ,
W. H. Kao  and
J.-M. Yang
P. C. Brennan
Affiliation:
Mechanics and Materials Technology Center, The Aerospace Corp.,El Segundo, CA 90245
W. H. Kao
Affiliation:
Mechanics and Materials Technology Center, The Aerospace Corp.,El Segundo, CA 90245
J.-M. Yang
Affiliation:
Department of Materials Science and Engineering, University of California, Los Angeles, CA 90024
Get access

Abstract

Ordered Ni3A1 alloys and their composites are attractive materials for elevated-temperature structural applications due to their many favorable properties. The addition of alloying elements can significantly lower the Ni3Al order-disorder transition temperature and also result in the formation of a Ni solid solution. As the percentage of Ni solid solution increases, the composite's room-temperature flexural strength increases. The effect of rocessing parameters on the material's microstructure is discussed. The complex matrix microstructure also has a significant effect on the composite's creep properties. Normal power-law creep was exhibited by the composite material when tested in compression.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 273: Symposium Q – Intermetallic Matrix Composites II , 1992 , 211
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Cahn, R. W., Siemers, P. A., Geiger, J. A., and Bardhan, P., Acta Metall., 35 (11), 2737 (1987).Google Scholar
2. Hemker, K. J., Mills, M. J., and Nix, W. D., Acta Metall., 39 (8), 1901 (1991).Google Scholar
3. West, D. R. F., Ternary Equilibrium Diagrams, 2nd ed. (Chapman and Hall, NY, 1982).Google Scholar
4. Liu, C. T., Sikka, V. K., Horton, J. A., and Lee, E. H., “Alloy Development and Mechanical Properties of Nickel Aluminide (Ni3A1) Alloys,” Oak Ridge National Laboratories Paper ORNL-6483, prepared for U. S. DOE, (1968).Google Scholar
5. Cahn, R. W., Siemers, P. A., and Hall, E. L., Acta Metall., 35, (11), 2753 (1987).Google Scholar
6. Sun, Y. Q., and Hazzledine, P. M., Phil. Mag. A, 58, (4), 603 (1988).Google Scholar
7. Brennan, P. C., Kao, W. H., and Yang, J.-M., (unpublished paper).Google Scholar
8. Nieh, T. G., Mayo, M. J., Kobayashi, M., and Wadsworth, J. (eds.), “Superplasticity in Metals, Ceramics, and Intermetallics,” Mater. Res. Soc., 196 189 (1990).Google Scholar
9. Hancock, G. F., Phys. Stat. Solidus (a), 7 535 (1971).Google Scholar