Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-29T09:03:17.425Z Has data issue: false hasContentIssue false
  • English
  • Français

Practical Application of a Geometrically Nonlinear Stress-Curvature Relation

Published online by Cambridge University Press:  22 February 2011

Christine B. Masters  and
N. J. Salamon
Christine B. Masters
Affiliation:
The Pennsylvania State University, Department of Engineering Science and Mechanics, University Park, PA 16802
N. J. Salamon
Affiliation:
The Pennsylvania State University, Department of Engineering Science and Mechanics, University Park, PA 16802
Get access

Abstract

A recently developed geometrically nonlinear stress-curvature relation based on a minimization of the total strain energy, which predicts a bifurcation in shape as the magnitude of intrinsic film stress increases, is discussed in this paper. It is compared with the linear theories of Stoney and Brenner & Senderoff for a thin molybdenum film on silicon substrates with various thicknesses. Although the ratio of film to substrate elastic modulus is only 2, Stoney's equation generates significant error for this film/substrate system and the Brenner & Senderoff relation should be used for calculating initial film stress when plate deflections are small. When deflections exceed approximately half the substrate thickness the Brenner & Senderoff equation produces over 10% error and consequently, the nonlinear stress-deflection relation should be used to relate plate curvatures to initial film stress.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 239: Symposium D – Thin Films: Stresses and Mechanical Properties III , 1991 , 293
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Hoffman, R.W., Surface and Interface Analysis 3 (1), 62–67 (1981).Google Scholar
[2] D'Heurle, R.M. and Harper, J.M.E., Thin Solid Films, 81–92 (1989).CrossRefGoogle Scholar
[3] Stoney, G.G., Proc. Roy. Soc. [A] 82, London, pp 172–175 (1909).Google Scholar
[4] Brenner, A. and Senderoff, S., National Bureau of Standards No. RP1954 42, February, 105–123 (1949).Google Scholar
[5] Morton, V.M., Corrosion Science 9, 261–270 (1969).Google Scholar
[6] Masters, C.B., Salamon, N.J., and Fahnline, D.E. in Thin Films: Stresses and Mechanical Properties II (Mater. Res. Soc. Proc. 188, Pittsburgh, PA, 1990) pp. 21–27.Google Scholar
[7] Harper, B.D. and Wu, C.P., Int. J. Solids Structures 26 (5/6), 511–525 (1990).Google Scholar
[8] Fahnline, D.E., Masters, C.B., and Salamon, N.J., J. Vacuum Science and Technology A9, 2483–2487 (1991).Google Scholar
[9] Ugural, A.C., Stresses in Plates and Shells, McGraw-Hill Book Company, New York, NY (1981).Google Scholar
[10] Glang, R., Holmwood, R.A., and Rosenfeld, R.L., The Review of Scientific Instruments 36 (1), 7–10 (1965).Google Scholar