No CrossRef data available.
Article contents
Photonic Crystal Back Reflectors for Enhanced Absorption in Amorphous Silicon Solar Cells
Published online by Cambridge University Press: 01 February 2011
Abstract
Photonic crystal back reflectors offer enhanced optical absorption in thin-film solar cells, without undesirable losses. Rigorous simulations of photonic crystal back reflectors predicted maximized light absorption in amorphous silicon solar cells for a pitch of 700-800 nm. Simulations also predict that for typical 250 nm i-layer cells, the periodic photonic crystal back reflector can improve absorption over the ideal randomly roughened back reflector (or the ‘4n2 classical limit') at wavelengths near the band edge. The PC back reflector provides even higher enhancement than roughened back reflectors for cells with even thinner i-layers. Using these simulated designs, we fabricated metallic photonic crystal back reflectors with different etch depths and i-layer thicknesses. The photonic crystals had a pitch of 760 nm and triangular lattice symmetry. The average light absorption increased with the PC back reflectors, but the greatest improvement (7-8%) in short circuit current was found for thinner i-layers. We have studied the dependence of cell performance on the etch depth of the photonic crystal. The photonic crystal back reflector strongly diffracts light and increases optical path lengths of solar photons.
Keywords
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 2010