Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-29T09:16:40.929Z Has data issue: false hasContentIssue false
  • English
  • Français

Modeling Soft Breakdown of Ultra-Thin Gate Oxide Layers

Published online by Cambridge University Press:  10 February 2011

Michel Houssa ,
P.W. Mertens  and
M.M. Heyns
Michel Houssa
Affiliation:
IMEC, Silicon Process Technology Division, Kapeldreef 75, B-3001 Leuven, BELGIUM
P.W. Mertens
Affiliation:
IMEC, Silicon Process Technology Division, Kapeldreef 75, B-3001 Leuven, BELGIUM
M.M. Heyns
Affiliation:
IMEC, Silicon Process Technology Division, Kapeldreef 75, B-3001 Leuven, BELGIUM
Get access

Abstract

The time-dependent dielectric breakdown of MOS capacitors with ultra-thin gate oxide layers is investigated. After the occurrence of soft breakdown, the gate current increases by 3 to 4 orders of magnitudes and behaves like a power law of the applied gate voltage. It is shown that this behavior can be explained by assuming that a percolation path is formed between the electron traps generated in the gate oxide layer during electrical stress of the capacitors. The time dependence of the gate voltage signal after soft breakdown is next analysed. It is shown that the fluctuations in the gate voltage are non-gaussian as well as that long-range correlations exist in the system after soft breakdown. These results can be explained by a dynamic percolation model, taking into account the trapping-detrapping of charges within the percolation cluster formed at soft breakdown.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 567: Symposium R – Ultrathin SiO2 and Higg-K Materials for ULSI Gate Dielectrics , 1999 , 307
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Lee, J.C., Chen, I.C., and Hu, C., IEEE Trans. Electron Devices 35, 2268 (1988).10.1109/16.8802Google Scholar
2 DiMaria, D.J., Cartier, E., and Arnold, D., J. Appl. Phys. 73, 3367 (1993).10.1063/1.352936Google Scholar
3 Lee, S.H. et al. , IEDM Tech. Dig. (IEEE, Piscataway, 1994), p. 605.Google Scholar
4 Depas, M., Nigam, T., and Heyns, M., IEEE Trans. Electron Devices 43, 1499 (1996).10.1109/16.535341Google Scholar
5 Roux, S. and Herrmann, H.J., Europhys. Lett. 4, 1227 (1987).10.1209/0295-5075/4/11/003Google Scholar
6 Lampert, M.A. and Mark, P., “Current Injection in Solids” (Academic Press, New York, 1970).Google Scholar
7 Degraeve, R. et al. , in IEDM Tech. Dig. (IEEE, Piscataway, 1995), p. 863.Google Scholar
8 Mantegna, R.N., Physica A 179, 232 (1991).10.1016/0378-4371(91)90061-GGoogle Scholar
9 Peng, C.-K. et al. Phys. Rev. E 49, 1685 (1994).10.1103/PhysRevE.49.1685Google Scholar