Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-29T09:57:45.093Z Has data issue: false hasContentIssue false

Low-Temperature Oxidation of Silicon(100) Substrates Using Atomic Oxygen

Published online by Cambridge University Press:  10 February 2011

T. Ueno
Affiliation:
Faculty of Technology, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184-8588, JAPAN, [email protected]
S. Chikamura
Affiliation:
Faculty of Technology, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184-8588, JAPAN, [email protected]
F. Sakuraba
Affiliation:
Faculty of Technology, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184-8588, JAPAN, [email protected]
Y Iwasaki
Affiliation:
Faculty of Technology, Tokyo University of Agriculture and Technology, Koganei, Tokyo 184-8588, JAPAN, [email protected]
Get access

Abstract

Low temperature oxidation process of Si(100) substrates using atomic oxygen has been proposed. For the generation of atomic oxygen, microwave plasma remotely attached on the oxidation chamber was used. In the microwave plasma, the large amount of rare gas and a small amount of 02 gas mixture was supplied. The existence of the large amount of rare gas controls the plasma energy to some restricted values associated with the metastable states of the rare gas. Consequently, using Kr as mixed rare gas, atomic oxygen were efficiently generated instead of excited 02 molecules with any vibrational or ionized states. The oxidation kinetics of crystalline Si using this process was shown to be diffusion limiting, even if the oxide thickness was less than several nm. The activation energy of B, which is referred to as the parabolic rate constant, was found to be as low as 0.14eV In addition, lower interface trap density of 2.6 × 1011/cm2/eV at the mid gap could be achieved for the as-grown SiO2/Si(100) interface at the processing temperature of 500C.

Type
Research Article
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]Ligenza, J.R.: J.Appl.Phys. 36(1965)2703.Google Scholar
[2]Kraitchman, J.: J.Appl.Phys. 38(1967)4323.Google Scholar
[3]Sugano, T.: Thin Solid Films 92(1982)19.Google Scholar
[4]Martinet, C. and Devine, R.A.B.: Appl.Phys.Lett. 67(1995)3500.Google Scholar
[5]Watanabe, K., Kimura, S. and Tatsumi, T.: Jpn.J.Appl.Phys. 38(1999)L1055.Google Scholar
[6]Choi, Y.W. and Ahn, B.T.- J.Appl.Phys. 86(1999)4004.Google Scholar
[7]Milonni, P.W. and Eberly, J.H.: lasers, John Wiley&Sons, New York, 1988, pp. 425.Google Scholar
[8]Moore, C.E.. Atomic Energy Levels, NSRDS-NBS, Washington D.C., 1971.Google Scholar
[9]Deal, B.E. and Grove, A.S.: J.Appl.Phys. 36(1965)3770.Google Scholar
[10]Franklin, J.K., Dillard, J.G., Rosenstock, H.M., Herron, J.T., Draxl, K. and Field, F.H.. Ionization Potentials, Appearance Potentials, and Heats of Formation of Gaseous Positive Ions, NSRDS-NBS, Washington D.C., 1969.Google Scholar
[11]Nikollian, E.H. and Brews, J.R.: MOS Physics and Technology, John Wiley and Sons Inc., New York, 1982, pp.331.Google Scholar