Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-17T17:17:03.609Z Has data issue: false hasContentIssue false
  • English
  • Français

Low Dielectric Constant Thermosetting Resins For Microelectronics

Published online by Cambridge University Press:  15 February 2011

Leonard J. Buckley ,
Arthur Snow ,
James Griffith ,
Henry S.-W. Hu  and
Mark Ray
Leonard J. Buckley
Affiliation:
Chemistry Division, Naval Research Laboratory, Washington, DC 20375
Arthur Snow
Affiliation:
Chemistry Division, Naval Research Laboratory, Washington, DC 20375
James Griffith
Affiliation:
Chemistry Division, Naval Research Laboratory, Washington, DC 20375
Henry S.-W. Hu
Affiliation:
Geo-Centers, Inc., Fort Washington, MD 20744
Mark Ray
Affiliation:
MCNC, Research Triangle Park, NC 27709
Get access

Abstract

Material technology for future microelectronics will require advances in all facets of materials and processing. Low dielectric constant resins that exhibit facile processing and good thermal and mechanical behavior represent one area of needed research and development. The dielectric constant must be lower than that of amorphous silicon dioxide and possess the right properties for integration with future metallurgies such as copper. Several thermoset resins that were predicted to possess the necessary characteristics have been synthesized and studied. These include a copolymer of 1,3,5-tris(2-allyloxy-hexafluoro-2-propyl) benzene with polymethylhydrosiloxane and several cyanate ester resins. Thermal gravimetric analysis indicated significant degradation between 300 and 400 degrees C depending upon the resin. Dielectric constants were measured up to 40 GHz and ranged from 2.25 to 2.75. Compatibility with copper multilevel processing was addressed. The processability of the dielectric resins was investigated to address the integration issues associated with the fabrication process.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 381: Symposium F – Low-Dielectric Constant Materials--Synthesis and Applications in Micro. , 1995 , 111
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Harper, J., et al, MRS Bulletin, XIX, 8, 23 (1994).Google Scholar
2. Mumby, S., Journal of Electronic Materials, 18, 2, 241 (1989).Google Scholar
3. Herminghause, D., Boese, D., Yoon, D., Smith, B., Applied Physics Letters, 59, 1043 (1991).Google Scholar
4. Shanker, K., MacDonald, J., Journal of Vacuum Science & Technology, A5, 2894 (1987).Google Scholar
5. Ray, M., Ren, Y., Linton, R., McGuire, G., Journal of Vacuum Science and Technology (in print).Google Scholar
6. Hu, H., Griffith, J., Buckley, L., Snow, A., Polymeric Materials Science and Engineering, 72, 446 (1995).Google Scholar
7. Snow, A., Buckley, L., Polymeric Materials Science and Engineering, 72, 439 (1995).Google Scholar
8. Soulen, R., Griffith, J., Journal of Fluorine Chemistry, 44, 210 (1989).Google Scholar
9. Bothra, S., Kellam, M., Garrou, P., Journal of Electronic Materials, 23, 8, 819 (1994).Google Scholar
10. Luther, B., White, J., Uzoh, C., Cacouris, T., Hummel, J., VMIC Conference Proceedings, 15 1993).Google Scholar