Article contents
All-polymer bulk heterojunction solar cells with high fill factors based on blends of poly-3-hexylthiophene: poly(perylene diimide-alt-terthiophene)
Published online by Cambridge University Press: 18 April 2012
Abstract
The photovoltaic characteristics of all polymer bulk heterojunction solar cells made of P3HT and a perylene diimide-based copolymer (PEK3) have been studied. Thermal annealing is needed to improve the performances. Annealing optimization induces an enhancement of the power conversion efficiency from 0.06 to 1%, Jsc from 0.24 to 2.9 mA/cm2 and FF from 0.32 to 0.59. The origin of such improvements has been investigated by studying the P3HT:PEK3 blend morphology, by means of absorption and emission spectroscopy and charge transport, from single carrier measurements on P3HT:PEK3 diodes. Upon annealing we have observed an increase in phase segregation and a 100-fold enhancement of the hole and electron mobilities, that favor the dissociation of bound electron-hole pairs and their transport to the electrodes. This explains the high FF of the annealed P3HT:PEK3 solar cell.
Keywords
- Type
- Research Article
- Information
- MRS Online Proceedings Library (OPL) , Volume 1390: Symposium H/I – Organic Photovoltaics–Materials to Devices , 2012 , mrsf11-1390-h09-12
- Copyright
- Copyright © Materials Research Society 2012
References
REFERENCES
- 6
- Cited by