No CrossRef data available.
Article contents
Fundamental Parameters For Microanalysis
Published online by Cambridge University Press: 14 March 2018
Extract
In order to perform quantitative X-ray microanalysis many parameters, representing the various stages of X-ray generation and transport through the specimen at the chosen experimental conditions, must be known for all of the elements that might be encountered. Although ideally quantification is done by reference to standards so that only the functional variation of these parameters is required, in current practice it is increasingly necessary to work in situations where standardization is impossible and consequently where absolute magnitudes must be known. The quality and quantity of data that is now available varies widely.
- Type
- Research Article
- Information
- Copyright
- Copyright © Microscopy Society of America 1996
References
1. Joy, DC, Scanning 17, (1995), 270.CrossRefGoogle Scholar A complete copy of this compilation is available on request from the author. SE and BSE data may be accessed at http://www.nsctoronto.com/nissei-sangyo.
2. Powell, CJ, NBS Special Publication 460, (1970), 97 Google Scholar
3. CA Queries and Estep, L, Phys.Rev. A34, (1986), 2488.Google Scholar
4. H Bishop, Ph..D Thesis, University of Cambridge, 1963
5. Oak Ridge National Laboratory is operated by Lockheed Martin Energy Research Corp. for the U..S. Department of Energy under contract number DE-AC05-96OR22464