Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by Crossref.
Xu, Su
and
Amirkhiz, Babak Shalchi
2016.
Mechanical Properties of Fuel Cladding Candidate Alloys for Canadian SCWR Concept.
JOM,
Vol. 68,
Issue. 2,
p.
469.
Wen, Donghui
Jiang, Beibei
Wang, Qing
Yu, Fengyun
Li, Xiaona
Tang, Rui
Zhang, Ruiqian
Chen, Guoqing
and
Dong, Chuang
2017.
Influences of Mo/Zr minor-alloying on the phase precipitation behavior in modified 310S austenitic stainless steels at high temperatures.
Materials & Design,
Vol. 128,
Issue. ,
p.
34.
Wen, D.H.
Wang, Q.
Jiang, B.B.
Zhang, C.
Li, X.N.
Chen, G.Q.
Tang, R.
Zhang, R.Q.
Dong, C.
and
Liaw, P.K.
2018.
Developing fuel cladding Fe-25Cr-22Ni stainless steels with high microstructural stabilities via Mo/Nb/Ti/Ta/W alloying.
Materials Science and Engineering: A,
Vol. 719,
Issue. ,
p.
27.
Wen, D.H.
Li, Z.
Jiang, B.B.
Wang, Q.
Chen, G.Q.
Tang, R.
Zhang, R.Q.
Dong, C.
and
Liaw, Peter K.
2018.
Effects of Nb/Ti/V/Ta on phase precipitation and oxidation resistance at 1073 K in alumina-forming austenitic stainless steels.
Materials Characterization,
Vol. 144,
Issue. ,
p.
86.
Li, Kaiyang
Zeng, Yimin
and
Luo, Jing-Li
2021.
Corrosion of SS310 and Alloy 740 in high temperature supercritical CO2 with impurities H2O and O2.
Corrosion Science,
Vol. 184,
Issue. ,
p.
109350.
Mohapatra, J.N.
Kulkarni, Ravindra
Satish Kumar, D.
and
Balachandran, G.
2022.
Failure analysis of areal gas distribution skirt plate.
Engineering Failure Analysis,
Vol. 131,
Issue. ,
p.
105885.
Wen, Donghui
Jiang, BeiBei
Huang, Zhaowen
Kong, Fengyu
Jiang, Xionghua
Wang, Anding
Liu, Gang
and
Wang, Biao
2023.
Supersaturation and dissolvable α-Cr phase enable superior oxidation resistance in FeCrNi medium-entropy alloys.
Journal of Alloys and Compounds,
Vol. 954,
Issue. ,
p.
170216.
Frazier, William
Sathanur, Arun
Taufique, Mohammad F. N.
Devanathan, Ram
and
Kappagantula, Keerti S.
2024.
Monte Carlo Simulations of 347H Stainless Steel Aging for the Synthetic Generation of Microstructures Under Creep Conditions.
Metallurgical and Materials Transactions A,