Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-22T19:33:56.158Z Has data issue: false hasContentIssue false
  • English
  • Français

Simulation and Optimization of a Carbon Nanotube Electron Source

Published online by Cambridge University Press:  28 September 2015

Alexandr Knápek ,
Tomáš Radlička  and
Stanislav Krátký
Alexandr Knápek
Affiliation:
Institute of Scientific Instruments of the ASCR, v.v.i., Královopolská 147, 612 64 Brno, Czech Republic.
Tomáš Radlička
Affiliation:
Institute of Scientific Instruments of the ASCR, v.v.i., Královopolská 147, 612 64 Brno, Czech Republic.
Stanislav Krátký
Affiliation:
Institute of Scientific Instruments of the ASCR, v.v.i., Královopolská 147, 612 64 Brno, Czech Republic.

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

This paper deals with an optimization of a field-emission structure concept based on vertically aligned carbon nanotubes (CNT). A design concept for a fabrication method for a gate structure based on electron beam lithography is reviewed in the first part of the paper. A single carbon nanotube is grown by the PECVD method inside the gate structure. Calculations and simulations that help determine gate structure proportions in order to obtain the best possible electron reduced brightness and to predict the cathode's electric behavior are also essential parts of this study.

Type
Electron Optics
Information
Microscopy and Microanalysis , Volume 21 , Supplement S4: Proceedings Ninth International Conference on Charged Particle Optics , June 2015 , pp. 60 - 65
Copyright
Copyright © Microscopy Society of America 2015 

References

[1]Xu, NS & Huq, SE, Mater. Sci. Eng. - R. Rep 48 (2005). p. 47.CrossRefGoogle Scholar
[2]Rinzler, AG, et al, Science 269 (1995). p. 1550.CrossRefGoogle Scholar
[3]Li, C, et al, ACS Nano 6 (2012). p. 3236.CrossRefGoogle Scholar
[4]Sun, Y, et al, Small 9 (2013). p. 3385.CrossRefGoogle ScholarPubMed
[5]Jonge, ND & Bonnard, JM, Phil. T. R. Soc. Lond 362 (2004). p. 2239.CrossRefGoogle Scholar
[6]Balasubramanian, K & Burghard, M, Small 1 (2002). p. 180.CrossRefGoogle Scholar
[7]Radlicka, T & Lencova, B, Ultramicroscopy 108 (2008). p. 445.CrossRefGoogle Scholar
[8]Cui, Z in Nanofabrication Principles, Capabilities and Limits. Springer, New York), p. 1.Google Scholar
[9]McCord, MA & Rooks, MJ in Handbook of Microlithography, Micromachining, and Microfabrication, Vol. 1 (ed. P Rai-Choudhury, (SPIE, Washington) p. 139.Google Scholar
[10]Fransen, MJ, et al, Adv. Imag. Electr. Phys 111 (1999). p. 91.CrossRefGoogle Scholar
[11] The authors acknowledge funding from the Ministry of Education, Youth and Sports of the Czech Republic (project number LO1212) and from Technology Agency of the Czech Republic (project number TE01020118).Google Scholar