No CrossRef data available.
Article contents
Microscopic Analysis of Twin Grain Boundaries in Alumina
Published online by Cambridge University Press: 02 July 2020
Abstract
Extended structural defects in α-Al2O3 (alumina), a technologically important, complex ceramic material were quantitatively analyzed with respect to grain boundary segregation, atomic and electronic structures using spatially resolved electron energy-loss spectroscopy (EELS), energy dispersive X-ray spectroscopy (EDS) and first-principles local-density-functional (LDFT) calculations. in this study the results of analytical investigations will be compared with the outcome of LDFT calculations.
The analytical measurements were performed with a dedicated scanning transmission electron microscope (TEM) VG HB501UX, operating at 100 kV and with a typical beam diameter of lnm. For the spatially resolved EELS a parallel electron energy-loss spectrometer (Gatan model 666) with an energy resolution of better than 0.8 eV was used. For the chemical analysis an EDS system (Noran-Gresham with a Si(Li) detector and a Norvar window) was applied. The detection limit of the EDX system for measuring interface excess is in the range of 0.3 atoms/nm2.
- Type
- Quantitative Transmission Electron Microscopy of Interfaces (Organized by M. Rüehle, Y. Zhu and U. Dahmen)
- Information
- Copyright
- Copyright © Microscopy Society of America 2001
References
1.) Marinopoulos, A.G. and Elsasser, C., Acta mater. 48, 4375 (2000).CrossRefGoogle Scholar
2.) Marinopoulos, A.G., Nufer, S., and Elsasser, C., submitted to Phys. Rev. B.Google Scholar
3.) Nufer, S. et al., submitted to Phys. Rev. Lett.Google Scholar
4.) Fischmeister, H. F. et. al., Rev. Sci. Instrum. 64, 234 (1993).CrossRefGoogle Scholar
5.) Bruley, J., Microsc. Microanal. Microstruct. 4, 23 (1993).CrossRefGoogle Scholar