No CrossRef data available.
Article contents
Electron Probe Microanalysis (EPMA) Characterization of Scales Formed on Laves Phase Reinforced Cr Alloys at 1100°C in Air
Published online by Cambridge University Press: 02 July 2020
Extract
Laves phase (Cr2X) strengthened Cr solid solution [Cr(X)]-based alloys are under development for a variety of high-temperature structural applications. Among the most promising alloys are castings based on the Cr(Ta)-Cr2Ta eutectic, which exhibit room-temperature fracture toughness in the 10-12 MPa√m range and creep rupture lives in excess of 1000 h at 1000° (138 MPa) in air. These alloys exhibit superior high-temperature oxidation resistance to previously developed Cr(Nb)-Cr2 Nb based alloys despite the general similarities of Ta and Nb. In order to optimize high-temperature oxidation resistance an understanding of why the Cr(Ta)-Cr2Ta alloys are more oxidation resistant is needed. Detailed EPMA characterization of the oxidized scaleswas initiated as a first steptowards gaining this understanding.
Fig. 1 shows a backscattered electron image of cast and heat treated and heat treated Cr-10Nb at.% after a 6 cycle, 120 h exposure at 1100°C in humid air. Most of the coupon was converted to a complex mixture of Cr-, Nb-, and Cr+ Nb- oxides.
- Type
- Oxidation/Corrosion
- Information
- Copyright
- Copyright © Microscopy Society of America
References
1. Brady, M.P., Zhu, J.H., Liu, C.T., Tortorelli, P.F., Wright, J.L., and Carmichael, C.A., in Proceedings of the Twelfth Annual Conference on Fossil Energy Materials, Knoxville, TN, May 12-14, 1998, Judkins, R.R., Compiler, paper 4.9 (1998).Google Scholar
2. McKamey, C.G. and Liu, C.T., unpublished results, Oak Ridge National Laboratory (1998).Google Scholar