Article contents
Cross-Section TEM Study On Kr+ Irradiation-Induced Amorphization in Quartz
Published online by Cambridge University Press: 02 July 2020
Extract
Radiation damage in quartz has been of interest to the semiconductor industry, optical fiber industry, and nuclear industry. Cross-section transmission electron microscopy (TEM) is a powerful tool for investigating the irradiation effects since it provides a direct measurement of the ion and the damage distributions, and can also provide detailed microstructural information such as the presence of amorphous regions and the size, density and chemical nature of defect aggregates. The results reported below are from a systematic cross-section TEM study on 1.5 MeV Kr+ ion irradiated quartz.
3-mm discs of quartz (along 010 face) were prepared with 100 μm in thickness. One side for each discs was well polished using a 0.05 μm diamond paste. The well-polished side was irradiated at room temperature with 1.5 MeV Kr ions in the HVEM-Tandem Facility at Argonne National Laboratory. Following irradiation, cross-section TEM specimens were prepared using the so-called T-tool technique, a modified tripot technique
- Type
- Geology and Mineralogy
- Information
- Microscopy and Microanalysis , Volume 3 , Issue S2: Proceedings: Microscopy & Microanalysis '97, Microscopy Society of America 55th Annual Meeting, Microbeam Analysis Society 31st Annual Meeting, Histochemical Society 48th Annual Meeting, Cleveland, Ohio, August 10-14, 1997 , August 1997 , pp. 771 - 772
- Copyright
- Copyright © Microscopy Society of America 1997
References
- 1
- Cited by