Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-20T10:30:49.311Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of Sil-ycy Alloy Layers Incorporating Si4c Building Blocks

Published online by Cambridge University Press:  02 July 2020

D. Chandrasekhar ,
David J. Smith  and
J. Kouvetakis
D. Chandrasekhar
Affiliation:
Center for Solid State Science, Arizona State University, Tempe, AZ85287
David J. Smith
Affiliation:
Center for Solid State Science, Arizona State University, Tempe, AZ85287
J. Kouvetakis
Affiliation:
Department of Chemistry and Biochemistry, Arizona State University, Tempe, AZ85287
Get access

Extract

Group IV based alloys have received considerable attention in recent years, because of the possibility to tailor the band gap of the material system with respect to that of Si. Significant results have already been achieved with Si-Ge system, where the band gap of pseudomorphic Si1-xGex alloys is smaller than that of Si. Introduction of C onto substitutional lattice sites in Si has been proposed as a possible alternate method for tailoring the electronic properties of Si. Carbon incorporation into Si substitutionally could result in alloys whose band gap would be a function of carbon concentration and lie between the values for silicon (E =1.1 eV) and β-SiC (Eg = 2.3 eV). However, due to the low-equilibrium solubility limit of C in Si, 3.5x1017cm−3 at the eutectic temperature, highly supersaturated and metastable layers are essential to significantly alter strain and electrical properties of the alloys.

In our present study, we have synthesized and characterized Si1-yCy (0.04 < y < 0.20) films grown on (001) Si substrates by ultra-high vacuum chemical vapor deposition at 625°C.

Type
Recent Developments in Microscopy for Studying Electronic and Magnetic Materials
Information
Microscopy and Microanalysis , Volume 3 , Issue S2: Proceedings: Microscopy & Microanalysis '97, Microscopy Society of America 55th Annual Meeting, Microbeam Analysis Society 31st Annual Meeting, Histochemical Society 48th Annual Meeting, Cleveland, Ohio, August 10-14, 1997 , August 1997 , pp. 457 - 458
Copyright
Copyright © Microscopy Society of America 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Patton, G.L.et al.,, IEEE Electron Device Lett. EDL-11 (1990) 171.10.1109/55.61782CrossRefGoogle Scholar
2.Posthill, J.B.et al., Appl. Phys. Lett. 56 (1990) 734.10.1063/1.102696CrossRefGoogle Scholar
3.Nozaki, T.et al., J. Electrochem. Soc. 117 (1970) 1566.10.1149/1.2407385CrossRefGoogle Scholar
4.Saidov, M.S.et al., phys. stat. solidi A 97 (1986) 347.10.1002/pssa.2210970203CrossRefGoogle Scholar
5.This work was supported by NSF Grant DMR-9458047 and DARPA contract MDA 972-95-3- 0047. Electron microscopy was conducted at the Center for High Resolution Electron Microscopy.Google Scholar