Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-23T11:22:35.200Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of Nanoscale Clusters in Ods Iron-Based Alloys

Published online by Cambridge University Press:  02 July 2020

E.A. Kenik ,
D. Hoelzer ,
P.J. Maziasz  and
M.K. Miller
E.A. Kenik
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN37831-6376
D. Hoelzer
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN37831-6376
P.J. Maziasz
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN37831-6376
M.K. Miller
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN37831-6376
Get access

Abstract

The high temperature application of iron-based ferritic alloys is limited by their rapid decrease of yield strength at temperatures approaching 1000°C. It has been shown that mechanical-alloying (MA) to produce oxide dispersion-strengthened (ODS) ferritic alloys improves their high temperature mechanical properties. Prior characterization of such materials has shown that in certain as-processed alloys the original yttria oxide particles are replaced by nanoscale (2-5 nm diameter) clusters containing Ti, Y and O. As a result of the high density of these fine clusters, dislocation pinning produced a ∼10-fold increase in dislocation density relative to similar ODS materials not exhibiting the nanoscale clustering. The improved creep resistance of the clustered material was attributed both to the higher dislocation density, additional dislocation pinning and resistance to recovery during creep. The current work examines clustering in a related alloy, as well as the effects of high temperature creep on the stability of such clusters.

Type
Microscopy in the Real World: Alloys and Other Materials
Information
Microscopy and Microanalysis , Volume 7 , Issue S2: Proceedings: Microscopy & Microanalysis 2001, Microscopy Society of America 59th Annual Meeting, Microbeam Analysis Society 35th Annual Meeting, Long Beach, California August 5-9, 2001 , August 2001 , pp. 550 - 551
Copyright
Copyright © Microscopy Society of America 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Smith, G.D. and deBarbadillo, J.J., in Structural Applications of Mechanical Alloying, eds. deBarbadillo, J.J. et al., pp. 117–123, ASM-Intemational, Materials Park, OH (1994).Google Scholar
2.Larson, D.J., Maziasz, P.J., Kim, I-S., and Miyahara, K., Scripta Mater. 22 (2001) 359–364.CrossRefGoogle Scholar
3. Thanks to Kaye Russell for preparation of the atom probe specimens. Research at the Oak Ridge National Laboratory SHaRE User Facility was sponsored by the Laboratory Directed Research and Development Program and the Division of Materials Sciences and Engineering, U.S. Department of Energy, under contract DE-AC05-00OR22725 with UT-Battelle, LLC.Google Scholar