Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by Crossref.
Gómez-Vargas, Oscar
Ortiz-Domínguez, Martín
Melo-Máximo, Lizbeth
Melo-Máximo, Dulce
Escalona-Cambray, Felipe
and
Solis-Romero, Jose
2020.
A Microstructure Comparison of TiN with a Cr Metallic Interlayer and Boride Layers Formed on AISI 304 Steel: Wear Properties.
Microscopy and Microanalysis,
Vol. 26,
Issue. S2,
p.
2216.
Solis-Romero, Jose
Ortiz-Domínguez, Martín
Gómez-Vargas, Oscar
Escalona-Cambray, Felipe
and
Zuno-Silva, Jorge
2020.
Characterization of PVD Coating and Carbo-boro-nitride Layer on ARMCO® Pure Iron.
Microscopy and Microanalysis,
Vol. 26,
Issue. S2,
p.
2644.
Ortiz-Domínguez, Martín
Morales-Robles, Ángel
Gómez-Vargas, Oscar
and
Solis-Romero, Jose
2020.
Recycling of the Powder-pack Boriding Mixture: Microstructural Characterization of Fe2B Layers on ASTM A36 Steel.
Microscopy and Microanalysis,
Vol. 26,
Issue. S2,
p.
2220.
Ortiz-Domínguez, Martín
Gómez-Vargas, Oscar
Solis-Romero, Jose
Morgado-González, Irving
Arenas-Flores, Alberto
and
Zuno-Silva, Jorge
2020.
Wear Properties of TiN Coating on AISI M2.
Microscopy and Microanalysis,
Vol. 26,
Issue. S2,
p.
2670.
Morgado-González, Irving
Ortiz-Domínguez, Martín
Gómez-Vargas, Oscar
Nieto-Sosa, José
Monroy-Palafox, Cristian
Ortiz-Ocampo, María
and
Solís-Romero, José
2021.
Microstructure and mechanical properties of borided AISI T1 high-speed steel by dehydrated paste-pack boriding.
Microscopy and Microanalysis,
Vol. 27,
Issue. S1,
p.
2376.
Morgado-González, Irving
Ortiz-Domínguez, Martín
Gómez-Vargas, Oscar
Cardoso-Legorreta, Edgar
García-Serrano, Jesús
Bárcenas-Castañeda, Mariana
Castellanos-Escamilla, Víctor
Moreno-González, Gina
and
Solís-Romero, José
2021.
Effect of thermochemical treatments on the surface hardening of a circular saw blade: A microstructure comparison of nitride layers, boride layers and TiN coating formed on ASTM A1011 steel.
Microscopy and Microanalysis,
Vol. 27,
Issue. S1,
p.
2372.
Ortiz-Domínguez, Martín
Cruz-Avilés, Arturo
Morales-Robles, Ángel
Gómez-Vargas, Oscar
Solís-Romero, José
Zuno-Silva, Jorge
and
Cardoso-Legorreta, Edgar
2021.
Hard layers based on metal borides: Microstructure and mechanical properties.
Microscopy and Microanalysis,
Vol. 27,
Issue. S1,
p.
1556.
Gómez-Vargas, Oscar
Solis-Romero, José
Carranza-Vargas, Cesar Iván
Martínez-Islas, Sandra Itzel
Uribe-Miguel, Angélica María
Marcelo-Sandra, Aliza
Cruz-Avilés, Arturo
Morales-Robles, Ángel Jesús
and
Ortiz-Domínguez, Martín
2022.
Microstructure and Mechanical Properties of Borided ASTM A709 Steel by Powder-pack Boriding.
Microscopy and Microanalysis,
Vol. 28,
Issue. S1,
p.
1028.
Keddam, M.
Kulka, M.
Makuch, N.
Ostrovska, K.
and
Maldzinski, L.
2023.
Microstructure and Wear Resistance of Nitride Layers on Armco-Iron Obtained By Nitriding with Zero Gas Flow.
Metal Science and Heat Treatment,
Vol. 65,
Issue. 5-6,
p.
370.
Frączek, Tadeusz
Prusak, Rafał
Michalski, Jerzy
and
Kowalewska-Groszkowska, Magdalena
2024.
Kinetics of Iron Nitride Layer Growth during the Nitriding of AISI 1085 Non-Alloy Steel and AISI 52100 Alloy Steel.
Materials,
Vol. 17,
Issue. 18,
p.
4623.
Fisha, Elias Tadesse
2024.
Improving surface hardness of AISI 1045 steels using melamine derived from urea.
Heat Treatment and Surface Engineering,
Vol. 6,
Issue. 1,