Hostname: page-component-78c5997874-4rdpn Total loading time: 0 Render date: 2024-11-08T04:45:56.079Z Has data issue: false hasContentIssue false
  • English
  • Français

Nanoindentation Properties and Finite Element Analysis of the Rostrum of Cyrtotrachelus buqueti Guer (Coleoptera: Curculionidae)

Published online by Cambridge University Press:  22 March 2019

Longhai Li ,
Ce Guo ,
Shun Xu ,
Yaopeng Ma  and
Zhiwei Yu
Longhai Li
Affiliation:
College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, 29 Yudao Street, Nanjing, 210016, People's Republic of China Institute of Bio-inspired Structure and Surface Engineering, Nanjing University of Aeronautics and Astronautics, 29 Yudao Street, Nanjing, 210016, People's Republic of China
Ce Guo*
Affiliation:
Institute of Bio-inspired Structure and Surface Engineering, Nanjing University of Aeronautics and Astronautics, 29 Yudao Street, Nanjing, 210016, People's Republic of China
Shun Xu
Affiliation:
Key Laboratory of Bionic Engineering (Ministry of Education, China), The College of Biological and Agricultural Engineering, Jilin University at Nanling Campus, 5988 Renmin Street, Changchun 130025, People's Republic of China
Yaopeng Ma
Affiliation:
Institute of Bio-inspired Structure and Surface Engineering, Nanjing University of Aeronautics and Astronautics, 29 Yudao Street, Nanjing, 210016, People's Republic of China
Zhiwei Yu
Affiliation:
Institute of Bio-inspired Structure and Surface Engineering, Nanjing University of Aeronautics and Astronautics, 29 Yudao Street, Nanjing, 210016, People's Republic of China
*
*Author for correspondence: Ce Guo, E-mail: [email protected]
Get access

Abstract

This work focuses on the application of nanoindentation measurements and the finite element method for analyzing the mechanical properties of the rostrum of the outstanding driller Cyrtotrachelus buqueti Guer. Nanoindentation tests were carried out to measure the Young's modulus and hardness of the rostrum, with the results for the “dry” samples being 13.886 ± 0.75 and 0.368 ± 0.0445 GPa, respectively. The values for the “fresh” samples showed no clear difference from those of the “dry” ones. Moreover, field observation was conducted to determine the motion behaviors of the rostrum on the weevil. Micro-computed tomography technology was employed to obtain structural information about the rostrum, using 9 µm slices. A real three-dimensional model of the rostrum was created using the MIMICS application. Finally, the mechanical properties of the rostrum were determined by finite element analysis. It was concluded that the rostrum provides an ideal biological template for the design of biocomposite materials and lightweight tube-shaped structures. The properties determined in this study can potentially be applied in different fields, such as in the design of automotive hybrid transmission shafts, helicopter tail drive shafts, robotic arms, and other sandwich structures in aerospace engineering.

Keywords

rostrumweevilnanoindentation propertiesmicro-CTthree-dimensional reconstruction
Type
Biological Applications
Information
Microscopy and Microanalysis , Volume 25 , Issue 3 , June 2019 , pp. 786 - 797
Copyright
Copyright © Microscopy Society of America 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Ahearne, M, Yang, Y, Then, K & Liu, K (2007). An indentation technique to characterize the mechanical and viscoelastic properties of human and porcine corneas. Ann Biomed Eng 35, 1608–16.Google Scholar
Aizenberg, J & Fratzl, P (2009). Biological and biomimetic materials. Adv Mater 21, 387–388.Google Scholar
Alam, M, Wahab, M & Jenkins, C (2007). Mechanics in naturally compliant structures. Mech Mater 39, 145–160.Google Scholar
Andrew, J, Singh, S, Chawla, N & Franz, N (2016). A multilayer micromechanical model of the cuticle of Curculio longinasus chittenden, 1927 (Coleoptera: Curculionidae). J Struct Biol 195, 139–158.Google Scholar
Bukejs, A & Legalov, A (2017). New species of sub-fossil weevils (Coleoptera, Curculionidae) in Madagascar copal. Paleontol J 51, 196–202.Google Scholar
Chen, Y & Zheng, Y (2014). Bioinspired micro-/nanostructure fibers with a water collecting property. Nanoscale 6, 7703–7714.Google Scholar
Dai, Z & Yang, Z (2010). Macro-/Micro-Structures of elytra, mechanical properties of the biomaterial and the coupling strength between elytra in beetles. J Bionic Eng 7, 6–12.Google Scholar
Davis, S (2011). Rostrum structure and development in the rice weevil Sitophilus oryzae (Coleoptera: Curculionoidea: Dryophthoridae). Arthropod Struct Dev 40, 549.Google Scholar
Hörnschemeyer, T, Bond, J & Young, P (2013). Analysis of the functional morphology of mouthparts of the beetle priacma serrata, and a discussion of possible food sources. Journal of Insect Science 13, 1–14.Google Scholar
Jin, T, Chang, Z, Yang, X, Zhang, J, Liu, X, Chetwynd, D, Chen, D & Sun, J (2015). Nanoindentation mechanical properties and structural biomimetic models of three species of insects wings. J Wuhan Univ Technol-Mater Sci Ed 30, 831–839.Google Scholar
Klocke, D & Schmitz, H (2011). Water as a major modulator of the mechanical properties of insect cuticle. Acta Biomater 7, 2935–42.Google Scholar
Li, L, Guo, C, Li, X & Han, C (2017 a). Microstructure and mechanical properties of rostrum in Cyrtotrachelus longimanus (Coleoptera: Curculionidae). Anim Cells Syst 21, 199–206.Google Scholar
Li, L, Guo, C, Xu, S & Li, X (2017 b). Morphology and nanoindentation properties of mouthparts in Cyrtotrachelus longimanus (Coleoptera: Curculionidae). Microsc Res Tech 80, 704–711.Google Scholar
Li, M, Chen, D, Zhang, S & Tong, J (2013). Biomimeitc design of a stubble-sutting disc using finite element analysis. J Bionic Eng 10, 118–127.Google Scholar
Li, X & Bhushan, B (2002). A review of nanoindentation continuous stiffness measurement technique and its applications. Mater Charact 48, 11–36.Google Scholar
Lucas, B & Oliver, W (1999). Indentation power-law creep of high-purity indium. Metall Mater Trans A 30, 601–610.Google Scholar
Meyers, M, Mckittrick, J & Chen, P (2013). Structural biological materials: Critical mechanics-materials connections. Science 339, 773–779.Google Scholar
Miserez, A, Weaver, J & Chaudhuri, O (2014). Biological materials and molecular biomimetics – filling up the empty soft materials space for tissue engineering applications. J Mater Chem B 3, 13–24.Google Scholar
Moon, M (2015). Microstructure of mandibulate mouthparts in the greater rice weevil, Sitophilus zeamais (Coleoptera: Curculionidae). Entomol Res 45, 9–15.Google Scholar
Oliver, W & Pharr, G (1992). An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7, 1564–1583.Google Scholar
Pajni, H & Chhibba, K (1972). Structure of rostrum in Calandra oryzae, (L.) (Coleoptera: Curculionidae). Int J Insect Morphol Embryol 1, 219–223.Google Scholar
Porter, M, Mckittrick, J & Meyers, M (2013). Biomimetic materials by freeze casting. JOM 65, 720–727.Google Scholar
Saha, R & Nix, W (2002). Effects of the substrate on the determination of thin film mechanical properties by nanoindentation. Acta Mater 50, 23–38.Google Scholar
Singh, S, Jansen, M, Franz, N & Chawla, N (2016). Microstructure and nanoindentation of the rostrum of Curculio longinasus, Chittenden, 1927 (Coleoptera: Curculionidae). Mater Charact 118, 206–211.Google Scholar
Sun, J & Bhushan, B (2012). Structure and mechanical properties of beetle wings: A review. RSC Adv 2, 12606–12623.Google Scholar
Sun, J, Guo, Y & Tong, J (2006). Testing methods for nanoindentation property of the cuticle of bovine hoof wall and dung beetle's foreleg femur. J Terramech. 43, 355–364.Google Scholar
Sun, J, Wu, W, Xue, W, Akhtar, R, Ren, L & Tong, J (2015). Quantitative nanomechanical properties of the cuticle of the multicolored Asian lady beetle using the modulus mapping technique. Curr Nanosci 11, 245–252.Google Scholar
Sun, J, Wu, W, Xue, W, Jin, T & Liu, X (2016). Anisotropic nanomechanical properties of bovine horn using modulus mapping. IET Nanobiotechnol 10, 334–339.Google Scholar
Tong, J, Xu, S, Chen, D & Li, M (2017). Design of a bionic blade for vegetable chopper. J Bionic Eng 14, 163–171.Google Scholar
Yang, Z & Dai, Z (2010). Morphology and mechanical properties of Cybister elytra. Chin Sci Bull 55, 771–776.Google Scholar
Zhang, Z, Jia, H, Sun, J & Tong, J (2016). Nanoindentation investigation of the stress exponent for the creep of dung beetle (Copris ochus Motschulsky) cuticle. Bioengineered 7, 357–364.Google Scholar
Zhao, Y, Wang, D, Tong, J & Sun, J (2016). Nanomechanical behaviour of the membranous wings of dragonfly Pantala flavescens, Fabricius. J Bionic Eng 13, 388–396.Google Scholar
Zhu, H, Yang, F, Li, J & Guo, Z (2016). High-efficiency water collection on biomimetic material with superwettable patterns. Chem Commun 52, 12415–12417.Google Scholar