Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-26T01:33:48.786Z Has data issue: false hasContentIssue false

Microstructure Of Tin Ohmic Contacts On N-Gan

Published online by Cambridge University Press:  02 July 2020

R.-J. Liu
Affiliation:
Science and Engineering of Materials Program and Center of Solid State Science, Arizona Satte University, Tempe, AZ85287-1704
R. W.Carpenter
Affiliation:
Science and Engineering of Materials Program and Center of Solid State Science, Arizona Satte University, Tempe, AZ85287-1704
M. J. Kim
Affiliation:
Science and Engineering of Materials Program and Center of Solid State Science, Arizona Satte University, Tempe, AZ85287-1704
Get access

Extract

GaN is a direct, wide band -gap semiconductor (Eg =3.4 eV) which has a potential application in electronic and optical devices including UV-emitting lasers and bright p-n junction GaN light emitting diodes. In order to attain optimum device performance, it is necessary to develop lowresistance, thermally stable and uniform ohmic contacts.

In this study, the TiN/GaN contact synthesis and examination of contact performance were conducted at North Carolina State University. Si-doped n-GaN films were grown on 6H-SiC substrates via MOVPE with an A1N buffer layer. The TiN films were deposited in an ion-beam assisted, UHV electron-beam evaporation system. TiN growth was performed at a substrate temperature of 350 °C and a nitrogen pressure of about 2×10-4 torr. The deposition rate was 1- 1.5 nm/min. The TiN contacts deposited on (0001) n-GaN were ohmic with high resistivity in the as-deposited condition, but the resistivity decreased sharply in response to annealing. The TiN/GaN interface was examined by transmission electron microscopy to provide correlations between changes in microstructure and electrical behavior.

Type
Atomic Structure And Microchemistry Of Interfaces
Copyright
Copyright © Microscopy Society of America

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Pankove, J. I., Mater. Res. Soc. Symp. Proc, Vol. 162 (1990) 515.CrossRefGoogle Scholar
2.Smith, L. L., Bremser, M. D., Carlson, E. P., Weeks, T. W. Jr., Huang, Y., Kim, M. J., Carpenter, R. W., and Davis, R. F., Mater. Res. Soc. Symp. Proc, Vol. 395 (1996) 861.CrossRefGoogle Scholar
3.Liu, R.-J et al, Microscopy & Microanalysis, Vol 4, Sup. 2 (1998) 668.CrossRefGoogle Scholar
4. This research was supported by the U. S. Department of Energy, Materials Sciences Division under grant DE-FG03-94ER45510.Google Scholar