Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-25T07:10:50.923Z Has data issue: false hasContentIssue false
  • English
  • Français

Interfacial stresses in externally FRP-plated structures: effectof shear deformations and fiber orientation

Published online by Cambridge University Press:  10 November 2009

Bachir Kerboua ,
El Abbès Adda Bedia  and
Abdelouahad Tounsi
Bachir Kerboua
Affiliation:
Laboratoire des Matériaux et hydrologie, Université de Sidi Bel Abbés BP 89, Cité Ben M'hidi, 22000 Sidi Bel Abbés, Algeria Université de Tlemcen, Faculté des Sciences de l'Ingénieur, Algeria
El Abbès Adda Bedia
Affiliation:
Laboratoire des Matériaux et hydrologie, Université de Sidi Bel Abbés BP 89, Cité Ben M'hidi, 22000 Sidi Bel Abbés, Algeria Université de Bel Abbés, Faculté des Sciences de l'Ingénieur, Algeria
Abdelouahad Tounsi
Affiliation:
Laboratoire des Matériaux et hydrologie, Université de Sidi Bel Abbés BP 89, Cité Ben M'hidi, 22000 Sidi Bel Abbés, Algeria Université de Bel Abbés, Faculté des Sciences de l'Ingénieur, Algeria
Get access

Abstract

The composite fiber materials of polymers (FRP) have physical properties, which are exploited recently for the reinforcement and rehabilitation of the structures, in mechanical, civil engineering and biomedical field, subjected to degradation or default risks. Since a beam without any form of reinforcement will fail when subjected to a relatively small tensile load. Therefore the use of the FRP to strengthen the structures is an effective solution to increase the overall strength technique. In this paper, a new theoretical approach model to estimate shear and peel-off stresses is proposed. Axial stresses and bending moment coupled with shear deformation and thermal effect in an FRP-strengthened beam are considered, including the variation in FRP plate fiber orientation.

Keywords

Interfacial stressesFRP compositesStrengtheningThermal stressFibersContraintes interfacialesFRP compositesRenforcementContraintes thermiquesFibres
Type
Research Article
Information
Mechanics & Industry , Volume 10 , Issue 5 , September 2009 , pp. 325 - 335
Copyright
© AFM, EDP Sciences, 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

An, W., Saadatmanesh, H., Ehsani, M.-R., RC beam strengthened with FRP plates: II. Analysis and parametric study, ASCE J. Struct. Eng. 117 (1991) 3434–3455 CrossRef
Seibel, F., Priestley, M.-J.-N., Hegemier, G.-A., Seismic retrofit of RC columns with continuous carbon fibre jackets, J. Comp. Const. 1 (1997) 52–62 CrossRef
Hamoush, A., Ahmed, S.-H., Concrete crack repair by stitches, J. Mater. Struct. 30 (1997) 418–423 CrossRef
J.-S.-E. Connor, New York State gives FRP's a try: Structure Magazine, Summer 1999
Lau, K.-T., Zhou, L.-M., Woo, C.-H., Strengthening and strain monitoring concrete structures using fibreglass composites and FBG sensor, J. Mater. Sci. Res. Int. 5 (1999) 216–221
Wu, Z., Matsuzaki, T., Tanabe, K., Interface crack propagation in FRP-Strengthened concrete structures. Non-metallic (FRP) reinforcement for concrete structures, Japan concrete inst. 1 (1997) 319–326
K.-R. Jones, R.-N. Swamy, A. Charif, Plate separation and anchorage of reinforced concrete beams strengthened by epoxy-bonded steel plates, struct. Eng. 66 (1988) 85–94
Roberts, T.-M., Approximate analysis of shear and normal stress concentrations in adhesive layer of plated RC beams, Struct. Eng. London 67 (1989) 229–233
Roberts, T.-M., Haji-Kazemi, H., Theoretical study of the behaviour of reinforced concrete beams strengthened by externally bonded steel plates, Proc. Int. Civil Eng. 87 (1989) 39–55
Oehlers, D.-J., Reinforced concrete beams with plates glued to their soffits, J. Strut. Eng. ASCE 118 (1992) 2023–2038 CrossRef
Baluch, M.-H., Ziraba, Y.-N., Sharif, A.-M., Al-Sulaimani, G.-J., Shear strength of plated RC beams, Mag. Concr. Res. 47 (1995) 369–374 CrossRef
Raoof, M., El-Rimawi, J.-A., Hassanen, M.-A.-H., Theoretical and experimental study on externally plated RC beams, Eng. Strut. 22 (2000) 85–101 CrossRef
Yuan, F., Teng, J.-G., Seracino, R., Full-Rang, Z.-S. Wu behaviour of FRP- to-concrete bonded joints, Eng. Struct. 26 (2004) 553–565 CrossRef
Malek, A.-M., Saadatmanesh, H., Ehsani, M.-R., Prediction of failure load of R/C beams strengthened with FRP plate due to stress concentration at the plate end, ACI Strut. J. 95 (1998) 142–152
Saadatmanesh, H., Malek, A.-M., Design guidelines for flexural strengthening of RC beams with FRP plates, J. Compos. Construct. ASCE 2 (1998) 158–164 CrossRef
Triantafillou, T.-C., Antonopoulos, C.-P., Design of concrete flexural members strengthened in shear with FRP, ASCE J. Compos. Construct. 4 (2000) 198–205 CrossRef
U. Meier, R. Betti (eds.), Recent Advances in Bridge Strengthening, Proc. US-Canada- Europe Workshop, Dubendorf 1997, EMPA
Chen, J.-F., Teng, J.-G., Anchorage strength models for FRP and steel plates bonded to concrete, ASCE J. Struct. Eng. 127 (2000) 784–791 CrossRef
Gao, B., Leung, C.-K.-Y., Kim, J.-K., Prediction of concrete cover separation failure for RC beams strengthened with CFRP strips, Eng. Struct. 27 (2005) 1771–1789 CrossRef
Ascione, L., Feo, L., Modelling of composite/concrete interface of RC beams strengthened with composite laminates. Compos: Part B 31 (2000) 535–540
Smith, J.-G., Teng, J., Interfacial stresses in plated beams, Eng. Struct. 23 (2001) 857–871 CrossRef
Lau, K.-T., Dutta, P.-K., Zhou, L.-M., Mechanics of bond in a FRP boned concrete beam, J. compos. part B 32 (2001) 491–502 CrossRef
Rabinovich, O., Frostig, Y., Closed-from high order analysis of RC beams strengthened with FRP J. Compos. Construct. ASCE 4 (2000) 65–74
Rabinovich, O., Frostig, Y., On edge stresses control in strengthened RC beams with FRP strips: adhesive layer profile effect, J. Eng. Mech. ASCE 127 (2001) 317–325 CrossRef
Rabinovich, O., Frostig, Y., Delamination failure of RC beams strengthened with FRP strips: a closed-form high order and fracture mechanics approach, J. Eng. Mech. ASCE 127 (2001) 852–861 CrossRef
Shen, H.-S., Teng, J.-G., Yang, J., Interfacial stresses in beams and slabs bonded with a thin plate, J. Eng. Mech. ASCE 127 (2001) 399–406 CrossRef
Tsai, M.-Y., Oplinger, D.-W., Improved theoretical solutions for adhesive lap joint, Int. J. solids struct. 35 (1998) 1165–1185
Tounsi, A., Improved theoretical solution for Interfacial stresses in concrete beams strengthened with FRP plate, J. Solids Struct. 43 (2006) 4154–4174
C.-T. Herakovich, Mechanic of fibrous composites, Wiley USA, 1998
M.-W. Hyer, Stress Analysis of fibre-reinforced composite material, McGraw Hill, USA, 1998
S.-N. Denton, Analysis of stresses developed, in FRP plated beams due to thermal effects, in: Proceeding of the conference on composites in civil engineering, Hong Kong, 2001, pp. 527–536