Article contents
An improved ‘vacuum’ grab for sampling the sea-floor
Published online by Cambridge University Press: 11 May 2009
Extract
The sampler to be described takes a small unstratified sample of the sea-bed, the sample being subject to a minimum of loss while being brought up. Such samples are of use in survey work, or for studies on grade size, mineralogical composition, chemical properties, or microfauna and flora of the deposits.
Although core-samples, in which the original stratification is retained, can be taken in soft muddy sediments without difficulty, it is not at all easy to take cores of sand or gravel. On such deposits an unstratified sample may be the best that can be obtained. Coarse sediments may be sampled by a dredge fitted with canvas bag, but when a small sample is required quickly, a light instrument which can be lowered vertically from the ship on a rope or hydro-graphic wire is needed. ‘Snapper’ samplers do not always take a satisfactory sample as the jaws may be prevented from closing by a pebble or shell wedged between them, much of the sample being lost while hauling up (cf. Stetson, 1938, p. 7). Stetson describes an instrument which takes a small semicircular core of sediment, the sample being sealed in the coring tube while being brought up, so preventing any loss of material. While no doubt taking good samples, the instrument is rather heavy (57 kg) and complicated in construction.
- Type
- Research Article
- Information
- Journal of the Marine Biological Association of the United Kingdom , Volume 34 , Issue 3 , October 1955 , pp. 545 - 551
- Copyright
- Copyright © Marine Biological Association of the United Kingdom 1955
References
- 6
- Cited by