Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-26T23:10:40.312Z Has data issue: false hasContentIssue false
  • English
  • Français

Effect of gallium oxide in preventing cristobalite formation in binary borosilicate glass composite

Published online by Cambridge University Press:  03 March 2011

Jau-Ho Jean  and
Tapan K. Gupta
Jau-Ho Jean
Affiliation:
Alcoa Electronic Packaging, Inc., San Diego, California 92127
Tapan K. Gupta
Affiliation:
Alcoa, Alcoa Center, Pennsylvania 15069
Get access

Abstract

When an appropriate mixture of low-softening borosilicate (BSG) and high-softening high silica (HSG) glasses is sintered at temperatures ranging from 800 to 1000 °C, a crystalline phase, identified as cristobalite by XRD, is known to precipitate out of the initial amorphous binary mixture of glasses as the sintering continues. The precipitation of cristobalite is found to originate in HSG and is controlled by the transport of alkali ions (e.g., K, Na, and Li) from BSG to HSG.1 In this paper we report that when a small amount of gallium oxide is present as a dopant in the above binary mixture of BSG and HSG, the cristobalite formation is completely prevented at the sintering temperatures investigated. The above result is attributed to a strong affinity between Ga+3 from gallium oxide particle and alkali ions from BSG, which diverts the diffusion of alkali ions from HSG to gallium oxide, thus forming a K+ and Ga+3-rich reaction layer adjacent to gallium oxide particles far too rapidly compared with that of cristobalite formation.

Type
Articles
Information
Journal of Materials Research , Volume 8 , Issue 9 , September 1993 , pp. 2393 - 2399
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Jean, J-H. and Gupta, T. K., J. Mater. Res. 7, 3103 (1992).CrossRefGoogle Scholar
2Jean, J-H. and Gupta, T. K., J. Mater. Res. 8, 356 (1993).CrossRefGoogle Scholar
3Kingery, W. D., Bowen, K. K., and Uhlmann, D. R., Introduction to Ceramics, 2nd ed. (John Wiley, New York, 1976), p. 87.Google Scholar
4Jean, J-H. and Gupta, T. K., J. Mater. Res. 7, 2514 (1992).CrossRefGoogle Scholar
5Doerner, P., Gauckler, L. J., Krieg, H., Lukas, H. L., Petzow, G., and Weiss, J., CALPHAD: Comput. Coupling Phase Diagrams Thermochem. 3, 241 (1979).CrossRefGoogle Scholar
6Jean, J-H. and Gupta, T. K., unpublished research.Google Scholar
7Westman, A. E. R. and Hugil, H. R., J. Am. Ceram. Soc. 13, 767 (1930).CrossRefGoogle Scholar
8Kingery, W. D., Bowen, H. K., and Uhlmann, D. R., Introduction to Ceramics, 2nd ed. (John Wiley, New York, 1976), p. 99.Google Scholar