Hostname: page-component-78c5997874-lj6df Total loading time: 0 Render date: 2024-11-09T07:37:58.722Z Has data issue: false hasContentIssue false
  • English
  • Français

Entry effects in the open thermosyphon

Published online by Cambridge University Press:  28 March 2006

B. W. Martin  and
F. C. Lockwood
B. W. Martin
Affiliation:
Department of Mechanical Engineering, Imperial College of Science and Technology, London
F. C. Lockwood
Affiliation:
Department of Mechanical Engineering, Imperial College of Science and Technology, London
Get access Rights & Permissions [Opens in a new window]

Abstract

In this paper flow-visualization techniques are used to study the flow instability which occurs at the orifice in the free convection open thermosyphon. The influence of the shape of the orifice on the measured heat transfer of the system is also studied under both laminar and turbulent conditions. The dominant mode of penetration of the hot stream by the cold fluid entering at the base of the reservoir is found to instigate a mixing region at the orifice. In turbulent flow this spreads into and eventually fills the tube as the Rayleigh number is increased. In such circumstances a sharp-edged orifice appears to give better overall heat transfer than a rounded orifice.

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 19 , Issue 2 , June 1964 , pp. 246 - 256
Copyright
© 1964 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Bayley, F. J., Milne, P. A. & Stoddart, D. E. 1961 Proc. Roy. Soc. A, 265, 97.
Bayley, F. J. & Czekanski, J. 1963 J. Mech. Engng Sci. 5, 295.
Eckert, E. R. G., Hartnett, J. P. & Irvine, T. F. 1960 A. S. M. E. Paper no. 60-WA-250, Heat Transfer Div.
Ellerbrock, H. 1951 General discussion on heat transfer, 5, pp. 415–16, Instn Mech. Engrs, Lond.Google Scholar
Hartnett, J. P. & Welsh, W. E. 1957 Trans. A. S. M. E. 79, 1551.
Hartnett, J. P., Welsh, W. E. & Larsen, F. W. 1959 Chem. Engng Progr., Symposium Series, Nuclear Engng, 55, 85.
Holt, J. S. C., Skipper, R. G. S. & Saunders, O. A. 1961 A. S. M. E. & Instn Mech. Engrs, Lond. Int. Heat Transfer Conf. Part V, p. 1003.
Leslie, F. M. 1959 J. Fluid Mech. 7, 115.
Leslie, F. M. & Martin, B. W. 1959 J. Mech. Eng. Sci, 1, 184.
Lighthill, M. J. 1953 Quart. J. Mech. 6, 398.
Martin, B. W. 1955 Proc. Roy. Soc. A, 230, 502.
Martin, B. W. 1959 Proc. Inst. Mech. Engrs, 173, 761.
Saunders, O. A. 1936 Proc. Roy. Soc. A, 157, 278.