Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-12-01T10:40:06.628Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical properties of North Sea Tertiary mudrocks: investigations by triaxial testing of side-wall cores

Published online by Cambridge University Press:  09 July 2018

L. Wensaas ,
P. Aagaard ,
T. Berre  and
E. Roaldset
L. Wensaas
Affiliation:
Department of Geology, University of Oslo, P.O. Box 1047 Blindern, N-0316 Oslo
P. Aagaard
Affiliation:
Department of Geology, University of Oslo, P.O. Box 1047 Blindern, N-0316 Oslo
T. Berre
Affiliation:
Norwegian Geotechnical Institute, P.O. Box 3930 Ullevål Hageby, N-0806 Oslo
E. Roaldset
Affiliation:
Department of Geology and Mineral Resources Engineering, Norwegian University of Science and Technology (NTNU), N-7034 Trondheim, Norway
Get access Rights & Permissions [Opens in a new window]

Abstract

In the North Sea Tertiary section, wellbore instability problems are frequently reported in Palaeocene-Early Oligocene smectite-rich mudrocks. Analysis of the mechanical properties of these Tertiary mudrocks is generally hampered by the lack of suitable core material. This study represents an attempt to study the geomechanical behaviour of mudrocks by triaxial tests of side-wall cores obtained from the borehole wall. The tests performed include measuring the changes in pore pressure during shearing and undrained shear strength in specimens initially consolidated to in situ effective stress levels. The coefficients of permeability (kf), estimated from the consolidation time behaviour range from 2.6 x 10-11 to 2.4 x 10-12 m/s. The tested cores behaved like slightly overconsolidated to normally consolidated materials with an initial near constant volume (elastic behaviour) for low deviatoric load followed by an increasingly contractant behaviour approaching failure. Compared with results from onshore analogues, the strength properties of the investigated mudrocks appear to be related to their content of expandable clay minerals. A wellbore stability chart to forecast adequate drilling fluid pressures for future wells has been developed by the use of linear (Mohr-Coulomb) failure criteria based on the peak strength data. It is demonstrated that side-walt cores can provide satisfactory test materials for rock mechanical analysis, and their use may serve to improve our knowledge of the rock mechanical behaviour of typically troublesome mudrocks for which no conventional cores are available.

Type
Research Article
Information
Clay Minerals , Volume 33 , Issue 1 , March 1998 , pp. 171 - 183
Copyright
Copyright © The Mineralogical Society of Great Britain and Ireland 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Aadnøy, B.S. (1988) Modelling of the stability of highly inclined boreholes in anisotropic rock formations. SPE Drilling Engineering 3, 259–268.CrossRefGoogle Scholar
Aadnøy, B.S. & Chenevert, M.E. (1987) Stability of highly inclined boreholes. SPE Drilling Engineering 2, 364–374.Google Scholar
Bishop, A.W. (1973) The influence of an undrained change in stress on the pore pressure in porous media of low compressibility. Geotechnique, 23, 435–442.Google Scholar
Bol, G.M., Wong, S.W., Davidson, C.J. & Woodland, D.C. (1994) Borehole stability in shales. SPE Drilling & Completion, 87-94.Google Scholar
Breckels, I.M. & vanEekelen, H.A.M. (1982) Relationship between horizontal stress and depth in sedimentary basins. J. Petr. Tech. September, 1982, 2191-2199.Google Scholar
Breton, J.R. & McLaurine, H.C. (1993) Modified polyamino acid hydration suppressant proves successful in controlling reactive shales. SPE Paper 26327, Proc. SPE flnn. Tech. Conf Exh., Drilling, Houston, Texas. CrossRefGoogle Scholar
Chenevert, M.E. (1989) Glycerol mud additive provides shale stability. Oil Gas J. July 1989, 60-64.Google Scholar
Chenevert, M.E. & Sharma, A.K. (199l) Permeability and effective pore pressure in shales. Paper IADC/ SPE 21918. Google Scholar
Ewy, R.T., Ross, G.D., Gast, M.R. & Steiger, R.P. (1994) North Sea case histories of wellbore stability predictions for successful high-angle Nelson Field wells. IADC/SPE 27496 paper, 1994 IADC/SPE Drilling Conference, Dallas, 1994, 589-598.CrossRefGoogle Scholar
Fjær, E., Holt, R.M., Horsmd, P., Raaen, A.M. & Risnes, R. (1992) Petroleum Related Rock Mechanics. Developments in Petroleum Science 33. Elsevier, Amsterdam.Google Scholar
Gaarenstroom, L., Tromp, R.A.J, deJong, M.C. & Brandenburg, A.M. (1993) Overpressures in the Central North Sea: implications for trap integrity and drilling safety. Pp. 1305-1314 in: Petroleum Geology of the Northwest Europe: Proc. 4th Conf. (Parker, L.R., editor). Geological Society, London.Google Scholar
Head, K.H. (1986) Manual of Soil Laboratory Testing 3: Effective Stress Tests. Pentech Press, London.Google Scholar
Isaksen, D. & Tonstad, K. (1989) A revised Cretaceous and Tertiary Iithostratigraphic nomenclature for the Norwegian North Sea. Norwegian Petroleum Directorate Bulletin No. 5.Google Scholar
Janbu, N. (1985) Soil models in offshore engineering, 1985. Rankine Lecture. Geotechnique, 35, 241–281.CrossRefGoogle Scholar
Jordt, H., Faleide, J.I., Bjørlykke, K. & lbrahim, M.I. (1995) Cenozoic sequence stratigraphy of the central and northern North Sea Basin: tectonic development, sediment distribution and provenance areas. Mar. Petrol. Geol. 12, 845–879.CrossRefGoogle Scholar
Kwakwa, K.A., Batchelor, A.S. & Clarc, R.C. (1991) Assessment of the mechanical stability of high-angle wells in block 22/11, Nelson Field discovery. SPE Drilling Engineering, 25–30.CrossRefGoogle Scholar
Marsden, J.R., Wu, B., Hudson, J.A. & Archer, J.S. (1989) Investigations of peak rock strength behaviour for wellbore stability prediction. Pp. 753-760 in: Rock at Great Depth (Maury, V. & Foumaintraux, D., editors). Balkema, Rotterdam.Google Scholar
Marsden, J.R., Holt, R.M., Nakken, S.J. & Raaen, A.M. (1992) Mechanical and petrophysical characterization of highly stressed mudstones. Pp. 51-56 in: Rock Characterization, Proc. ISRM Conf. Europe 92 (Hudson, J.A., editor). Chester, England.Google Scholar
McLean, M.R. & Addis, M.A. (1990a). Wellbore stability analysis: A review of current methods of analysis and their field application. IADC/SPE Paper 19941, IADC/SPE Drilling Conf., Houston, Texas, 1990. CrossRefGoogle Scholar
McLean, M.R. & Addis, M.A. (1990b) Wellbore stability: The effect of strength criteria on mud weight recommendations. SPE Paper 19941, 65th Ann. Tech. Conf. Exhibition Soc. Petrol. Engineers. New Orleans, 1990. CrossRefGoogle Scholar
Mody, F.K. & Hale, A.H. (1993) Borehole stability model to couple the mechanics and chemistry of drilling fluid shale interaction. SPE/IADC 25728 paper 1993 SPE/IADC Conf. Amsterdam, 1993, 473-490.Google Scholar
Nakken, S.J., Christensen, T.L., Marsden, J.R. & Holt, R.M. (1989) Mechanical behaviour of clays at high stress levels for wellbore stability applications. Pp. 141-148 in: Rock at Great Depth (Maury, V. & Foumaintraux, D., editors). Balkema, Rotterdam.Google Scholar
Skempton, A.W. (1954) The pore pressure coefficients A and B. Geotechnique, 4, 143–147.CrossRefGoogle Scholar
Steiger, R.P. (1982) Fundamentals and the use of potassium/polymer drilling fluids to minimize drilling and completion problems associated with hydratable shales. JPT, 1661-1670.CrossRefGoogle Scholar
Steiger, R.P. & Leung, P.K. (1988) Quantitative determination of the mechanical properties of shales. SPE Paper 18024, SPE Ann. Tech. Conf. Exh., 1988. Google Scholar
Steiger, R.P. & Leung, P.K. (1990) Lecture: Predictions of wellbore stability and shale formations at great depths. Pp. 1209-1218 in: Rock at Great Depth (Maury, V. & Foumaintraux, D., editors). Balkema, Rotterdam.Google Scholar
Steiger, R.P. & Leung, P.K. (1992) Quantitative determination of the mechanical properties of shales. SPE Drilling Engineering, 181–185.Google Scholar
Tyridal, D.S. (1994) Litologisk og mineralogisk sammensetning av slamsteiner i relasjon til loggrespons. Cand. Scient. (MSc) Thesis, Univ. Oslo, Norway.Google Scholar
Walker, G.R. (1961) Vermiculite minerals. Pp. 279-324 in: The X-ray Identification and Crystal Structures of Clay Minerals (Brown, G., editor). Mineralogical Society, London.Google Scholar
Wang, C., Mao, N. & Wu, F.T. (1980) Mechanical properties of clays at high pressure. Geophys. Res. 85, 1462–1468.Google Scholar
Warpinski, N.R. (1992) Rock mechanic issues in completion and stimulation operations. Proc. 33rd U.S. Symposium, Rock Mechanics, 375-386.Google Scholar
Wensaas, L., Shaw, H.F., Gibbons, K., Aagaard, P. & Dypvik, H. (1994) Nature and causes of overpressuring in mudrocks of the Gulifaks area, North Sea. Clay Miner., 29, 439–449.Google Scholar