Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-28T17:11:25.122Z Has data issue: false hasContentIssue false
  • English
  • Français

Buckling of Simply Supported Orthotropic Skew Plates

Published online by Cambridge University Press:  07 June 2016

J.B. Kennedy  and
M.K. Prabhakara
J.B. Kennedy
Affiliation:
(Department of Civil Engineering, University of Windsor, Windsor, Ontario, Canada)
M.K. Prabhakara
Affiliation:
(Department of Civil Engineering, University of Windsor, Windsor, Ontario, Canada)
Get access

Summary

A double Fourier series solution is presented for the buckling of simply supported orthotropic and isotropic skew plates, subjected to in-plane compressive and shear edge loads. All the boundary conditions, including the vanishing of the normal bending moment along the edges, are satisfied. Numerical results, suitable for design purposes, are presented graphically for a number of independent parameters such as skew angle, ratio of flexural rigidities and aspect ratio. The results show that the buckling strength is substantially effected by the skew angle, and to a lesser extent, by the ratio of the flexural rigidities and aspect ratio. In contrast with positive shear edge loads, which tend to decrease the skew angle, negative shear edge loads appear to reduce the buckling strength of orthotropic and isotropic skew plates.

Type
Research Article
Information
Aeronautical Quarterly , Volume 29 , Issue 3 , August 1978 , pp. 161 - 174
Copyright
Copyright © Royal Aeronautical Society. 1978

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Salvadori, M.G. Numerical Calculation of the Buckling Loads by Finite Differences, Proceedings of American Society of Civil ngineers, Vol. 75, p. 1441, 1949.Google Scholar
2 Wittrick, W.H. On the Buckling of Oblique Plates in Shear, Aircraft Engineering, Vol. 28, p. 25, 1956.Google Scholar
3 Argyris, J.H.. Continua and Discontinua (An Apercu of Recent Developments of the Matrix Displacement Method), Matrix Methods in Structural Mechanics, Wright Air Development Center, Ohio, p. 11, 1966.Google Scholar
4 Yoshimura, Y. and Iwata, K. Buckling of Simply Supported Oblique Plates, Journal of Applied Mechanics, Vol. 30, p. 363, 1963.Google Scholar
5 Durvasula, S. Buckling of Simply Supported Skew Plates, Journal of the Engineering Mechanics Division, Proceedings of American Society of Civil Engineers, Vol. 97, p. 967, 1971.Google Scholar
6 Whitney, J.M. Analysis of Anisotropic Rectangular Plates, AIAA Journal, Vol. 10, p. 1344, 1972.Google Scholar
7 Green, A.E. Double Fourier Series and Boundary Value Problems, Proceedings of the Cambridge Philosophical Society, Vol. 40, p. 228, 1944.Google Scholar
8 Lekhnitskii, S.G. Anisotropic Plates, Gordon and Breach Science Publishers, New York, 1968, p. 289.Google Scholar
9 Morley, L.S.D. Skew Plates and Structures, Pergamon Press, London, 1963, pp. 45–51.Google Scholar
10 Faddeeva, D.K. and Faddeeva, V.N. Computation Methods in Linear Algebra, W.H. Freeman and Publishers, San Francisco, 1963.Google Scholar
11 Wilkinson, J.H. Algebraic Eigenvalue Problem, Oxford University Press, London, 1965.Google Scholar