Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-23T16:12:23.910Z Has data issue: false hasContentIssue false
  • English
  • Français

Alignment Device and Thermal-Control System for High-Temperature X-Ray Diffractometry

Published online by Cambridge University Press:  06 March 2019

I. Corvin ,
F. Schossberger  and
F. Ticulka
I. Corvin
Affiliation:
Armour Research Foundation of Illinois Institute of Technology, Chicago, Illinois
F. Schossberger
Affiliation:
Armour Research Foundation of Illinois Institute of Technology, Chicago, Illinois
F. Ticulka
Affiliation:
Armour Research Foundation of Illinois Institute of Technology, Chicago, Illinois
Get access

Abstract

A high-temperature high-vacuum X-ray diffractometer attachment was constructed to observe formation of materials at elevated temperatures. The device consists of a conventional water-cooled compartment, a resistance-type furnace for heating samples to 800°C, and inlets and outlets for gaseous reactants and evacuation. Two sources are available for evaporation of materials which may react with or coat the sample. The sample is aligned by a two-part sample-slit system. The sample temperature is regulated by means of a current-adjusting control unit and a self-saturating reactor with suitably positioned thermocouples. Temperature distribution and constancy over the sample surface were determined.

Type
Research Article
Information
Advances in X-Ray Analysis , Volume 5: Tenth Annual Conference on Applications of X-ray Analysis, August 7-9, 1961 , 1961 , pp. 221 - 228
Copyright
Copyright © International Centre for Diffraction Data 1961

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Birks, L. S. and Friedman, H., “A High-Temperature X-Ray Diffraction Apparatus,” Rev. Sci. Instr., Vol. 18, No. 8, August 1947, p. 576.Google Scholar
2. Van Valkenburg, Alvin Jr. and McMurdie, Howard F., “High-Temperature X-Ray Diffraction Apparatus,” Nat. Bur. Standards (O.S.) Research Papers, RP 1782, Vol. 38, April 1947, p. 415.Google Scholar
3. Birks, L. S., “Apparatus for X-Ray Diffraction Studies of Metals under Controlled Stress at Elevated Temperature,” Rev. Sci. Instr., Vol. 25, No. 10, October 1954, p. 963.Google Scholar
4. Chiotti, P., “Adapation of a Geiger Counter X-Ray Diffra ceo meter for High-Temperature Investigation,” Rev. Set. Instr., Vol. 25, No. 7, July 1954, p. 683.Google Scholar
5. Butters, R. G. and Gordon, J. Parr. “A High-Temperature X-Ray Goniometer,” Can. J. Tech., Vol. 33, 1955, p. 117.Google Scholar
6. Mauer, Floyd A. and Bolz, Leonard H., “Measurement of Thermal Expansion of Cermet Components by High-Temperature X-Ray Diffraction,” Wright Air Development Division Technical Report 55-473, December 1955.Google Scholar
7. Johnson, J. R. and White, G. D., “Note on a High-Temperature Attachment for an X-Ray Spectrometer,” J. Am. Ceram. Soc, Vol. 39, No. 6, June 1956, p. 227.Google Scholar
8. Williamson, G. K. and Moore, A., “A Precision High-Temperature Specimen Chamber for an X-Ray Diffractomecer,” J. Sci. Instr., Vol. 33, March 1956, p. 107.Google Scholar
9. Goon, Edward J., Mason, John T., and Thomas, R. P. Jr., “X-Ray Powder Diffraction Assembly for Studies at Elevated Temperatures and High Gas Pressures,” Rev. Sci. Instr., Vol. 28, May 1957, p. 342.Google Scholar
10. Grim, Ralph E. and Kulbicki, G., “Study of High-Temperature Reactions in die Clay Minerals by Means of X-Rays,” presented at the Congress of Ceramic Techniques, Paris, 1957.Google Scholar
11. Perri, J. A., Banks, E., and Post, B., “Study of Phase Transitions in WO3 with a High-Temperature X-Ray Diffractometer,” J. Appl. Phys., Vol. 28, No. 11, November 1957, p. 1272.Google Scholar
12. Kennedy, S. W. and Calvert, L. D., “An Oxidizing Atmosphere Furnace for Use with an X-Ray Diffractometer,” J. Sci. Instr., Vol. 35, February 1958, p. 61.Google Scholar
13. Aruja, E., Melch, J. H. and Gutt, W., “X-Ray Analysis Technique for Very High Temperatures,” J. Sci. Instr., Vol. 36, No. 1, 1959, p. 16.Google Scholar
14. Baun, William L., “A High-Temperature X-Ray Diffractometer Specimen Mount,” Wright Air Development Division Technical Note 59-139, October 1959.Google Scholar
15. Spreadbo rough, J. and Christian, J. W., “High-Temperature X-Ray Diffrac tome ter,” J. Sci. Instr., Vol. 36, No. 3, 1959, p. 116.Google Scholar
16. Eaun, William L., “Design and Application of a Variable-Temperature Diffract orne ter Specimen Mount,” Advances in X-Ray Analysis, Vol. 4, University of Denver, Plenum Press, 1960, p. 201.Google Scholar
17. Leighly, H. P. Jr., “Apparatus for the Study of RecrystalUzation Rates,” Rev. Sci. Instr., Vol. 31, No. 7, July 1960, p. 752.Google Scholar