On the basis of crystal structures of the pyrroloquinoline quinone (PQQ) dependent enzymes methanol dehydrogenase (MDH) and soluble glucose dehydrogenase (s-GDH), different catalytic mechanisms have been proposed. However, several lines of biochemical and kinetic evidence are strikingly similar for both enzymes. To resolve this discrepancy, we have compared the structures of these enzymes in complex with their natural substrates in an attempt to bring them in line with a single reaction mechanism. In both proteins, PQQ is located in the center of the molecule near the axis of pseudo-symmetry. In spite of the absence of significant sequence homology, the overall binding of PQQ in the respective active sites is similar. Hydrogen bonding interactions are made with polar protein side chains in the plane of the cofactor, whereas hydrophobic stacking interactions are important below and above PQQ. One Arg side chain and one calcium ion are ligated to the ortho-quinone group of PQQ in an identical fashion in either active site, in agreement with their proposed catalytic function of polarizing the PQQ C5-O5 bond. The substrates are bound in a similar position above PQQ and within hydrogen bond distance of the putative general bases Asp297 (MDH) and His144 (s-GDH). On the basis of these similarities, we propose that MDH and s-GDH react with their substrates through an identical mechanism, comprising general base-catalyzed hydride transfer from the substrate to PQQ and subsequent tautomerization of the PQQ intermediate to reduced PQQ.

α1-Microglobulin (α1m) is an electrophoretically heterogeneous plasma protein. It belongs to the lipocalin superfamily, a group of proteins with a three-dimensional (3D) structure that forms an internal hydrophobic ligand-binding pocket. α1m carries a covalently linked unidentified chromophore that gives the protein a characteristic brown color and extremely heterogeneous optical properties. Twenty-one different colored tryptic peptides corresponding to residues 88–94, 118–121, and 122–134 of human α1m were purified. In these peptides, the side chains of Lys92, Lys118, and Lys130 carried size heterogeneous, covalently attached, unidentified chromophores with molecular masses between 122 and 282 atomic mass units (amu). In addition, a previously unknown uncolored lipophilic 282 amu compound was found strongly, but noncovalently associated with the colored peptides. Uncolored tryptic peptides containing the same Lys residues were also purified. These peptides did not carry any additional mass (i.e., chromophore) suggesting that only a fraction of the Lys92, Lys118, and Lys130 are modified. The results can explain the size, charge, and optical heterogeneity of α1m. A 3D model of α1m, based on the structure of rat epididymal retinoic acid-binding protein (ERABP), suggests that Lys92, Lys118, and Lys130 are semiburied near the entrance of the lipocalin pocket. This was supported by the fluorescence spectra of α1m under native and denatured conditions, which indicated that the chromophores are buried, or semiburied, in the interior of the protein. In human plasma, approximately 50% of α1m is complex bound to IgA. Only the free α1m carried colored groups, whereas α1m linked to IgA was uncolored.

Proteins often require cofactors to perform their biological functions and must fold in the presence of their cognate ligands. Using circular dichroism spectroscopy, we investigated the effects of divalent metal binding upon the folding pathway of Escherichia coli RNase HI. This enzyme binds divalent metal in its active site, which is proximal to the folding core of RNase HI as defined by hydrogen/deuterium exchange studies. Metal binding increases the apparent stability of native RNase HI chiefly by reducing the unfolding rate. As with the apo-form of the protein, refolding from high denaturant concentrations in the presence of Mg2+ follows three-state kinetics: formation of a rapid burst phase followed by measurable single exponential kinetics. Therefore, the overall folding pathway of RNase HI is minimally perturbed by the presence of metal ions. Our results indicate that the metal cofactor enters the active site pocket only after the enzyme reaches its native fold, and therefore, divalent metal binding stabilizes the protein by decreasing its unfolding rate. Furthermore, the binding of the cofactor is dependent upon a carboxylate critical for activity (Asp10). A mutation in this residue (D10A) alters the folding kinetics in the absence of metal ions such that they are similar to those observed for the unaltered enzyme in the presence of metal.

The complete covalent structure of a novel boar DQH sperm surface protein resistant to many classical procedures of enzymatic fragmentation was determined. The relative molecular mass of the major form of this protein determined by ESI-MS and MALDI-MS was 13,065.2 ± 1.0 and 13,065.1, respectively. However, additional peaks differing by 162 Da (i.e., minus hexose), 365 Da (i.e., minus hexose and N-acetylhexosamine), 146 Da (i.e., plus deoxyhexose), and 291 Da (i.e., plus sialic acid) indicated the heterogeneity due to differences in glycosylation. The complete covalent structure of the protein was determined using automated Edman degradation, MALDI-MS, and post-source decay (PSD) MALDI-MS, and shown to consist of N-terminal O-glycosylated peptide followed by two fibronectin type II repeats. The carbohydrates are O-glycosidically linked to threonine 10, as confirmed by PSD MALDI-MS of the isolated N-terminal glycopeptide. Eight cysteine residues of the protein form four disulfide bridges, the positions of which were assigned from MALDI-MS and Edman degradation data. We conclude that mass spectral techniques provide an indispensable tool for the detailed analysis of the covalent structure of proteins, especially those that are refractory to standard approaches of protein chemistry.

The human fibrinogen γ-chain C-terminal segment functions as the platelet integrin binding site as well as the Factor XIIIa cross-linking substrate and thus plays an important role in blood clot formation and stabilization. The three-dimensional structure of this segment has been determined using carrier protein driven crystallization. The C-terminal segment, γ-(398–411), was attached to a linker sequence at the C-terminus of glutathione S-transferase and the structure of this fusion protein determined at 1.8 Å resolution. Functional studies of the chimeric protein demonstrate that the fibrinogen sequence in the presence of the carrier protein retains its specific functions as ligand for platelet integrin αIIb β3 (gpIIb/IIIa) and as a cross-linking substrate for Factor XIIIa. The structure obtained for the fibrinogen γ-chain segment is not affected by crystal packing and can provide the missing links to the recently reported model of cross-linked fibrin.

CrmA is an unusual viral serpin that inhibits both cysteine and serine proteinases involved in the regulation of host inflammatory and apoptosis processes. It differs from other members of the serpin superfamily by having a reactive center loop that is one residue shorter, and by its apparent inability to form SDS-stable covalent complexes with cysteine proteinases. To obtain insight into the inhibitory mechanism of crmA, we determined the crystal structure of reactive center loop-cleaved crmA to 2.9 Å resolution. The structure, which is the first of a viral serpin, suggests that crmA can inhibit cysteine proteinases by a mechanism analogous to that used by other serpins against serine proteinases. However, one striking difference from other serpins, which may be significant for in vivo function, is an additional highly charged antiparallel strand for β sheet A, whose sequence and length are unique to crmA.

The 2.1 Å resolution crystal structure of flavin reductase P with the inhibitor nicotinamide adenine dinucleotide (NAD) bound in the active site has been determined. NAD adopts a novel, folded conformation in which the nicotinamide and adenine rings stack in parallel with an inter-ring distance of 3.6 Å. The pyrophosphate binds next to the flavin cofactor isoalloxazine, while the stacked nicotinamide/adenine moiety faces away from the flavin. The observed NAD conformation is quite different from the extended conformations observed in other enzyme/NAD(P) structures; however, it resembles the conformation proposed for NAD in solution. The flavin reductase P/NAD structure provides new information about the conformational diversity of NAD, which is important for understanding catalysis. This structure offers the first crystallographic evidence of a folded NAD with ring stacking, and it is the first enzyme structure containing an FMN cofactor interacting with NAD(P). Analysis of the structure suggests a possible dynamic mechanism underlying NADPH substrate specificity and product release that involves unfolding and folding of NADP(H).

The possible role of the central β-domain (residues 151–287) of streptokinase (SK) was probed by site-specifically altering two charged residues at a time to alanines in a region (residues 230–290) previously identified by Peptide Walking to play a key role in plasminogen (PG) activation. These mutants were then screened for altered ability to activate equimolar “partner” human PG, or altered interaction with substrate PG resulting in an overall compromised capability for substrate PG processing. Of the eight initial alanine-linker mutants of SK, one mutant, viz. SKKK256,257AA (SK-D1), showed a roughly 20-fold reduction in PG activator activity in comparison to wild-type SK expressed in Escherichia coli (nSK). Five other mutants were as active as nSK, with two [SKRE248.249AA and SKEK281.282AA, referred to as SK(C) and SK(H), respectively] showing specific activities approximately one-half and two-thirds, respectively, that of nSK. Unlike SK(C) and SK(H), however, SK(D1) showed an extended initial delay in the kinetics of PG activation. These features were drastically accentuated when the charges on the two Lys residues at positions 256 and 257 of nSK were reversed, to obtain SKKK256.257EE [SK(D2)]. This mutant showed a PG activator activity approximately 10-fold less than that of SK(D1). Remarkably, inclusion of small amounts of human plasmin (PN) in the PG activation reactions of SK(D2) resulted in a dramatic, PN dose-dependent rejuvenation of its PG activation capability, indicating that it required pre-existing PN to form a functional activator since it could not effect active site exposure in partner PG on its own, a conclusion further confirmed by its inability to show a “burst” of p-nitrophenol release in the presence of equimolar human PG and p-nitrophenyl guanidino benzoate. The steady-state kinetic parameters for HPG activation of its 1:1 complex with human PN revealed that although it could form a highly functional activator once “supplied” with a mature active site, the Km for PG was increased nearly eightfold in comparison to that of nSK-PN. SK mutants carrying simultaneous two- and three-site charge-cluster alterations, viz., SKRE248.249AA;EK281.282AA [SK(CH)], SKEK272.273AA;EK281.282AA [SK(FH)], and SKRE248.249AA;EK272.273AA;EK281.282AA [SK(CFH)], showed additive/synergistic influence of multiple charge-cluster mutations on HPG activation when compared to the respective “single-site” mutants, with the “triple-site” mutant [SK(CFH)] showing absolutely no detectable HPG activation ability. Nevertheless, like the other constructs, the double- and triple-charge cluster mutants retained a native like affinity for complexation with partner PG. Their overall structure also, as judged by far-ultraviolet circular dichroism, was closely similar to that of nSK. These results provide the first experimental evidence for a direct assistance by the SK β-domain in the docking and processing of substrate PG by the activator complex, a facet not readily evident probably because of the flexibility of this domain in the recent X-ray crystal structure of the SK-plasmin light chain complex.

The structural study of peptides belonging to the terminal domains of histone H1 can be considered as a step toward the understanding of the function of H1 in chromatin. The conformational properties of the peptide Ac-EPKRSVAFKKTKKEVKKVATPKK (CH-1), which belongs to the C-terminal domain of histone H1° (residues 99–121) and is adjacent to the central globular domain of the protein, were examined by means of 1H-NMR and circular dichroism. In aqueous solution, CH-1 behaved as a mainly unstructured peptide, although turn-like conformations in rapid equilibrium with the unfolded state could be present. Addition of trifluoroethanol resulted in a substantial increase of the helical content. The helical limits, as indicated by (i, i + 3) nuclear Overhauser effect (NOE) cross correlations and significant up-field conformational shifts of the Cα protons, span from Pro100 to Val116, with Glu99 and Ala117 as N- and C-caps. A structure calculation performed on the basis of distance constraints derived from NOE cross peaks in 90% trifluoroethanol confirmed the helical structure of this region. The helical region has a marked amphipathic character, due to the location of all positively charged residues on one face of the helix and all the hydrophobic residues on the opposite face. The peptide has a TPKK motif at the C-terminus, following the α-helical region. The observed NOE connectivities suggest that the TPKK sequence adopts a type (I) β-turn conformation, a σ-turn conformation or a combination of both, in fast equilibrium with unfolded states. Sequences of the kind (S/T)P(K/R)(K/R) have been proposed as DNA binding motifs. The CH-1 peptide, thus, combines a positively charged amphipathic helix and a turn as potential DNA-binding motifs.

Biotin and lipoic acid moieties are the covalently attached coenzyme cofactors of several multicomponent enzyme complexes that catalyze key metabolic reactions. Attachment of these moieties to the biotinyl- and lipoyl-dependent enzymes is post-translationally catalyzed by specific biotinylating and lipoylating protein enzymes. In Escherichia coli, two different enzymes, LplA and LipB, catalyze independent pathways for the lipoylation of the relevant enzymes, whereas only one enzyme, the BirA protein, is responsible for all the biotinylation. Counterparts of the E. coli BirA, LplA, and LipB enzymes have been previously identified in many organisms, but homology among the three families has never been reported. Computational analysis based on PSI-BLAST profiles and secondary structure predictions indicates, however, that lipoylating and biotinylating enzymes are evolutionarily related protein families containing a homologous catalytic module. Sequence conservation among the three families is very poor, but a single lysine residue is strictly conserved in all of them, which, according to the available X-ray crystal structure of the E. coli BirA protein, is expected to contribute to the binding of lipoic acid in the LplA and LipB enzymes.

Methylene is one of, if not the, most reactive organic chemical known. It has a very low specificity, which makes it essentially useless for synthesis, but suggests a possible role in protein footprinting with special importance in labeling solvent accessible nonpolar areas, identifying ligand binding sites, and outlining interaction areas on protomers that form homo or hetero oligomers in cellular assemblies. The singlet species is easily and conveniently formed by photolysis of diazirine. The reactions of interest are insertion into C-H bonds and addition to multiple bonds, both forming strong covalent bonds and stable compounds. Reaction with proteins and peptides is reported even in aqueous solutions where the vast majority of the reagent is used up in forming methanol. Species containing up to 5 to 10 extra :CH2 groups are easily detected by electrospray mass spectroscopy. In a mixture of a 14 Kd protein and a noninteracting 1.7 Kd peptide, the distribution of mass peaks in the electrospray spectra was close to that expected from random modification of the estimated solvent accessible area for the two molecules. For analysis at the single residue level, quantitation at labeling levels of one 13CH2 group per 10 to 20 kDa of protein appears to be possible with isotope ratio mass spectroscopy. In the absence of reactive solvents, photolysis of diazirine produces oily polymeric species that contain one or two nitrogen atoms, but not more, and are water soluble.

The thioredoxin action upon the 2-oxoacid dehydrogenase complexes is investigated by using different thioredoxins, both wild-type and mutated. The attacking cysteine residue of thioredoxin is established to be essential for the thioredoxin-dependent activation of the complexes. Mutation of the buried cysteine residue to serine is not crucial for the activation, but prevents inhibition of the complexes, exhibited by the Clamydomonas reinhardtii thioredoxin m disulfide. Site-directed mutagenesis of D26, W31, F/W12, and Y/A70 (the Escherichia coli thioredoxin numbering is employed for all the thioredoxins studied) indicates that both the active site and remote residues of thioredoxin are involved in its interplay with the 2-oxoacid dehydrogenase complexes. Sequences of 11 thioredoxin species tested biochemically are aligned. The thioredoxin residues at the contact between the α3/310 and α1 helices, the length of the α1 helix and the charges in the α2-β3 and β4-β5 linkers are found to correlate with the protein influence on the 2-oxoacid dehydrogenase complexes (the secondary structural elements of thioredoxin are defined according to Eklund H et al., 1991, Proteins 11:13–28). The distribution of the charges on the surface of the thioredoxin molecules is analyzed. The analysis reveals the species specific polarization of the thioredoxin active site surroundings, which corresponds to the efficiency of the thioredoxin interplay with the 2-oxoacid dehydrogenase systems. The most effective mitochondrial thioredoxin is characterized by the strongest polarization of this area and the highest value of the electrostatic dipole vector of the molecule. Not only the magnitude, but also the orientation of the dipole vector show correlation with the thioredoxin action. The dipole direction is found to be significantly influenced by the charges of the residues 13/14, 51, and 83/85, which distinguish the activating and inhibiting thioredoxin disulfides.

The aim of the present study is to understand the structural features responsible for the lethal activity of snake venom cardiotoxins. Comparison of the lethal potency of the five cardiotoxin isoforms isolated from the venom of Taiwan cobra (Naja naja atra) reveals that the lethal potency of CTX I and CTX V are about twice of that exhibited by CTX II, CTX III, and CTX IV. In the present study, the solution structure of CTX V has been determined at high resolution using multidimensional proton NMR spectroscopy and dynamical simulated annealing techniques. Comparison of the high resolution solution structures of CTX V with that of CTX IV reveals that the secondary structural elements in both the toxin isoforms consist of a triple and double-stranded antiparallel β-sheet domains. Critical examination of the three-dimensional structure of CTX V shows that the residues at the tip of Loop III form a distinct “finger-shaped” projection comprising of nonpolar residues. The occurrence of the nonpolar “finger-shaped” projection leads to the formation of a prominent cleft between the residues located at the tip of Loops II and III. Interestingly, the occurrence of a backbone hydrogen bonding (Val27CO to Leu48NH) in CTX IV is found to distort the “finger-shaped” projection and consequently diminish the cleft formation at the tip of Loops II and III. Comparison of the solution structures and lethal potencies of other cardiotoxin isoforms isolated from the Taiwan cobra (Naja naja atra) venom shows that a strong correlation exists between the lethal potency and occurrence of the nonpolar “finger-shaped” projection at the tip of Loop III. Critical analysis of the structures of the various CTX isoforms from the Taiwan cobra suggest that the degree of exposure of the cationic charge (to the solvent) contributed by the invariant lysine residue at position 44 on the convex side of the CTX molecules could be another crucial factor governing their lethal potency.

The effect of pressure on the unfolding of bovine α-lactalbumin was investigated by ultraviolet absorption methods. The change of molar volume associated with unfolding, ΔV, was measured in the presence or absence of guanidine hydrochloride at pH 7. The ΔV was estimated to be −63 cm3/mol in the absence of a chemical denaturant. While in the presence of guanidine hydrochloride (GuHCl), it was found that ΔV was −66 cm3/mol at 25 °C and was independent of the concentration of GuHCl, despite the fact that the molten globule fraction in the total unfolding product decreased with the increase of GuHCl concentration. The results indicate that the volume of α-lactalbumin only changes at the transition from a native to a molten globule state, and almost no volume change has been found during the transition from a molten globule to the unfolded state.

Genetically-encoded affinity tags constitute an important strategy for purifying proteins. Here, we have designed a novel affinity matrix based on the bis-arsenical fluorescein dye FlAsH, which specifically recognizes short α-helical peptides containing the sequence CCXXCC (Griffin BA, Adams SR, Tsien RY, 1998, Science 281:269–272). We find that kinesin tagged with this cysteine-containing helix binds specifically to FlAsH resin and can be eluted in a fully active form. This affinity tag has several advantages over polyhistidine, the only small affinity tag in common use. The protein obtained with this single chromatographic step from crude Escherichia coli lysates is purer than that obtained with nickel affinity chromatography of 6xHis tagged kinesin. Moreover, unlike nickel affinity chromatography, which requires high concentrations of imidazole or pH changes for elution, protein bound to the FlAsH column can be completely eluted by dithiothreitol. Because of these mild elution conditions, FlAsH affinity chromatography is ideal for recovering fully active protein and for the purification of intact protein complexes.

Fold assignments for proteins from the Escherichia coli genome are carried out using BASIC, a profile–profile alignment algorithm, recently tested on fold recognition benchmarks and on the Mycoplasma genitalium genome and PSI BLAST, the newest generation of the de facto standard in homology search algorithms. The fold assignments are followed by automated modeling and the resulting three-dimensional models are analyzed for possible function prediction.

Close to 30% of the proteins encoded in the E. coli genome can be recognized as homologous to a protein family with known structure. Most of these homologies (23% of the entire genome) can be recognized both by PSI BLAST and BASIC algorithms, but the latter recognizes an additional 260 homologies. Previous estimates suggested that only 10–15% of E. coli proteins can be characterized this way. This dramatic increase in the number of recognized homologies between E. coli proteins and structurally characterized protein families is partly due to the rapid increase of the database of known protein structures, but mostly it is due to the significant improvement in prediction algorithms.

Knowing protein structure adds a new dimension to our understanding of its function and the predictions presented here can be used to predict function for uncharacterized proteins. Several examples, analyzed in more detail in this paper, include the DPS protein protecting DNA from oxidative damage (predicted to be homologous to ferritin with iron ion acting as a reducing agent) and the ahpC/tsa family of proteins, which provides resistance to various oxidating agents (predicted to be homologous to glutathione peroxidase).

In the fold recognition approach to structure prediction, a sequence is tested for compatibility with an already known fold. For membrane proteins, however, few folds have been determined experimentally. Here the feasibility of computing the vast majority of likely membrane protein folds is tested. The results indicate that conformation space can be effectively sampled for small numbers of helices. The vast majority of potential monomeric membrane protein structures can be represented by about 30-folds for three helices, but increases exponentially to about 1,500,000 folds for seven helices. The generated folds could serve as templates for fold recognition or as starting points for conformational searches that are well distributed throughout conformation space.

The prediction of binding energies from the three-dimensional (3D) structure of a protein–ligand complex is an important goal of biophysics and structural biology. Here, we critically assess the use of empirical, solvent-accessible surface area-based calculations for the prediction of the binding of Src-SH2 domain with a series of tyrosyl phosphopeptides based on the high-affinity ligand from the hamster middle T antigen (hmT), where the residue in the pY+3 position has been changed. Two other peptides based on the C-terminal regulatory site of the Src protein and the platelet-derived growth factor receptor (PDGFR) are also investigated. Here, we take into account the effects of proton linkage on binding, and test five different surface area-based models that include different treatments for the contributions to conformational change and protein solvation. These differences relate to the treatment of conformational flexibility in the peptide ligand and the inclusion of proximal ordered solvent molecules in the surface area calculations. This allowed the calculation of a range of thermodynamic state functions (ΔCp, ΔS, ΔH, and ΔG) directly from structure. Comparison with the experimentally derived data shows little agreement for the interaction of SrcSH2 domain and the range of tyrosyl phosphopeptides. Furthermore, the adoption of the different models to treat conformational change and solvation has a dramatic effect on the calculated thermodynamic functions, making the predicted binding energies highly model dependent. While empirical, solvent-accessible surface area based calculations are becoming widely adopted to interpret thermodynamic data, this study highlights potential problems with application and interpretation of this type of approach. There is undoubtedly some agreement between predicted and experimentally determined thermodynamic parameters; however, the tolerance of this approach is not sufficient to make it ubiquitously applicable.

The native form of some proteins such as strained plasma serpins (serine protease inhibitors) and the spring-loaded viral membrane fusion proteins are in a metastable state. The metastable native form is thought to be a folding intermediate in which conversion into the most stable state is blocked by a very high kinetic barrier. In an effort to understand how the spontaneous conversion of the metastable native form into the most stable state is prevented, we designed mutations of α1-antitrypsin, a prototype serpin, which can bypass the folding barrier. Extending the reactive center loop of α1-antitrypsin converts the molecule into a more stable state. Remarkably, a 30-residue loop extension allows conversion into an extremely stable state, which is comparable to the relaxed cleaved form. Biochemical data strongly suggest that the strain release is due to the insertion of the reactive center loop into the major β-sheet, A sheet, as in the known stable conformations of serpins. Our results clearly show that extending the reactive center loop is sufficient to bypass the folding barrier of α1-antitrypsin and suggest that the constrain held by polypeptide connection prevents the conversion of the native form into the lowest energy state.

The ligand-binding domain of the human low-density lipoprotein receptor consists of seven modules, each of 40–45 residues. In the presence of calcium, these modules adopt a common polypeptide fold with three conserved disulfide bonds. A concatemer of the first and second modules (LB1–2) folds efficiently in the presence of calcium ions, forming the same disulfide connectivities as in the isolated modules. The three-dimensional structure of LB1–2 has now been solved using two-dimensional 1H NMR spectroscopy and restrained molecular dynamics calculations. No intermodule nuclear Overhauser effects were observed, indicating the absence of persistent interaction between them. The near random-coil NH and Hα chemical shifts and the low φ and ψ angle order parameters of the four-residue linker suggest that it has considerable flexibility. The family of LB1–2 structures superimposed well over LB1 or LB2, but not over both modules simultaneously. LB1 and LB2 have a similar pattern of calcium ligands, but the orientations of the indole rings of the tryptophan residues W23 and W66 differ, with the latter limiting solvent access to the calcium ion. From these studies, it appears that although most of the modules in the ligand-binding region of the receptor are joined by short segments, these linkers may impart considerable flexibility on this region.