Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-23T17:30:02.947Z Has data issue: false hasContentIssue false
  • English
  • Français

Resistive Oxygen Gas Sensors Using Cerium Oxide Nanosized Powder

Published online by Cambridge University Press:  01 February 2011

Norimitsu Murayama ,
Noriya Izu ,
Woosuck Shin  and
Ichiro Matsubara
Norimitsu Murayama
Affiliation:
National Institute of Advanced Industrial Science and Technology, Nagoya 463–8560, Japan
Noriya Izu
Affiliation:
National Institute of Advanced Industrial Science and Technology, Nagoya 463–8560, Japan
Woosuck Shin
Affiliation:
National Institute of Advanced Industrial Science and Technology, Nagoya 463–8560, Japan
Ichiro Matsubara
Affiliation:
National Institute of Advanced Industrial Science and Technology, Nagoya 463–8560, Japan
Get access

Abstract

Cerium oxide nanosized powder was synthesized by modified precipitation method. The precipitate, which was formed from the addition of NH4OH to Ce(NO3)3 aqueous solution, and was filtered. The obtained gel was mixed with carbon powder with a particle size of about 20 nm by a mechanically rotating mixer. The mixture was dried at 343 K in air. The carbon powder was burned out by heat treatment at 1173 K in air for 4 h, resulting in the formation of CeO2 powder with a size of 50 nm. A thick film was formed on an alumina substrate by screen printing, and was fired at 1373 K. The thick film had porous structure and the grain size was about 120 nm. The resistance of the thick film was almost proportional to P (O2)1/6, where P (O2) is oxygen partial pressure, in the P (O2) range from 10−13 to 105 Pa at 1073 and 1173 K. The response time (t90) was 23 and 7 ms at 1023 K when P(O2) changed from 65 to 25 kPa and 25 to 65 kPa, respectively. The reason for this result was explained on the basis of surface reaction of cerium oxide grain.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 828: Symposium A – Semiconductor Materials for Sensing , 2004 , A3.2/K4.2
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kainz, J.L., Smith, J.C., SAE Technical Paper Series, 1999–01–0546, (1999).Google Scholar
2. Izu, N., Shin, W., Murayama, N., Sensors and Actuators B 87, 99 (2002).Google Scholar
3. Millot, F., De Mierry, P., J.Phys. Chem. Solids 46 797 (1985).Google Scholar
4. Izu, N., Shin, W., Murayama, N., Sensors and Actuators B 87, 95 (2002).Google Scholar
5. Izu, N., Shin, W., Murayama, N., Sensors and Actuators B 93, 449 (2003).Google Scholar
6. Izu, N., Shin, W., Matsubara, I., Murayama, N., Sensors and Actuators B 94, 222 (2003).Google Scholar
7. Izu, N., Shin, W., Matsubara, I., Murayama, N., Sensors and Actuators B 100, 411 (2004).Google Scholar
8. Izu, N., Shin, W., Matsubara, I., Murayama, N., Sensors and Actuators B 101, 381 (2004).Google Scholar
9. Beie, H.-J., Gnörich, A., Sensors and Actuators B 4, 393 (1991).Google Scholar
10. Lampe, U., Gerblinger, J., Meixner, H., Sensors and Actuators B 7, 787 (1992).Google Scholar
11. Shin, W., Izu, N., Matsubara, I., Murayama, N., Sensors and Actuators B 100, 395 (2004).Google Scholar
12. Panlener, R. J., Blumenthal, R. N., Garnier, J. E., J.Phys. Chem. Solids, 36, 1213 (1975).Google Scholar
13. Murayama, N., Shin, W., Sago, S., Hayashi, M., US Patent 6,780,393 B2 (2004).Google Scholar