Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-29T08:05:25.275Z Has data issue: false hasContentIssue false
  • English
  • Français

Carbon Steel Canister Performance Assessment: Iron Transfer Study

Published online by Cambridge University Press:  21 March 2011

Antonín Vokál ,
Dmitrij Lukin  and
Dušan Vopálka
Antonín Vokál
Affiliation:
Nuclear Research Institute Rez plc, Czech Republic
Dmitrij Lukin
Affiliation:
Nuclear Research Institute Rez plc, Czech Republic
Dušan Vopálka
Affiliation:
Department of Nuclear Chemistry, Czech Technical University in Prague, Czech Republic
Get access

Abstract

Carbon steel has been chosen in the Czech disposal concept of spent fuel disposal in a granite host rock as a reference material for disposal canisters. On the basis of the results of performance assessment studies, it could be decided whether this material is suitable or whether a more corrosion resistant, and also more expensive, material should substitute it. A number of papers have convincingly shown that iron transfer constraints contribute to a significant decrease in corrosion rate, but no study hasso far been devoted to modeling this process. In this paper the effects of initial corrosion rate, corrosion product solubility and porosity and other repository parameters on the transfer of iron to the host rock are modeled using a numerical transport computer code. It was found that the critical parameter for iron transfer is the solubility of corrosion products, considerably affecting the steady state corrosion rate. The initial corrosion rate of carbon steel and the sorption properties of bentonite primarily affect the time needed to achieve a steady state of corrosion. The results of the calculations strongly suggest that the constraints on iron transfer from the canister surface will govern the corrosion rate of carbon steel canisters, whose lifetime, owing to this effect, can stretch to millions of years.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 932: Symposium – Scientific Basis for Nuclear Waste Management XXIX , 2006 , 24.1
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Anantatmula, R.P., Delegard, C.H., Duncan, D.R., Nuclear and Chemical Waste Management 7, 167–173 (1987).Google Scholar
2. Marsh, G.P., Taylor, K.J., Corrosion Science Vol. 28, pp. 289, (1988).Google Scholar
3. Honda, A., Teshima, T., Tsurudome, K., Ishikawa, H., Yusa, Y., Sasaki, N., Mat. Res. Soc. Symp.Proc. 212, 287 (1991).Google Scholar
4. Kozaki, T., Imamura, Y., Takada, J., Sato, S., Ohashi, H., Mat. Res. Soc. Symp. Proc. 353, 329 1994)Google Scholar
5. Smart, N.R., Blackwood, D.J., Werme, L. O., Corrosion 58, 7,547, (2002).Google Scholar
6. Smart, N. R., Rance, A.P., Werme, L.O., Mat. Res.Soc.Symp.Proc. 807, 441, ( 2004).Google Scholar
7. Lee, J.H., Atkins, J.E., Dunlap, B., Mat. Res.Soc.Symp.Proc. 713, 1075, (2001).Google Scholar
8. Zavoshy, S.J., Chambre, P.L., Pigford, T.H., Mat. Res. Soc. Symp. Proc. 44, 311, (1985).Google Scholar
9. Kamei, G., Oda, C., Mitsui, S., Shibata, M., Shinozaki, T., Engineering Geology 54, 15–20, (1999).Google Scholar
10. Golder Associates, GoldSim Contaminant Transport Module, manual Version 1.30, April (2002)Google Scholar
11. Fukaya, Y., Akashi, M., Mat. Res. Soc. Symp. Proc. 556, 871, (1998).Google Scholar
12. Appelo, C.G.J., Postma, D., Geochemistry, Groundwater and Pollution, Belkem, Rotterdam, (1993).Google Scholar