No CrossRef data available.
Article contents
Large-Scale Model Testing of a Concrete Silo EBS for Low- and Intermediate-Level Waste Disposal
Published online by Cambridge University Press: 10 February 2011
Abstract
This study focuses on demonstrating the feasibility of constructing a large reinforced concrete silo for the disposal of low- and intermediate-level radioactive waste. In a large-scale model test, the results of temperature (from heat of hydration) and thermal stress analyses were confirmed, as was the practicality of countermeasures to prevent thermal cracking. After one year, the average permeability of the model silo was estimated to be below 1×10−11m/s.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1998
References
REFERENCES
1 JSCE: Standard Specifications for Design and Construction of Concrete Structures, Part 2 for Construction, pp. 182~183, 1996.3.Google Scholar
2
Konishi, K., Takeda, N., Iriya, K., Fujiwara, A. and Tsuji, Y.: Experimental Study and Analysis for Preventing Thermal Crack of Large Cylindrical Reinforced Concrete Silo, Journal of Materials, Concrete Structures and Pavements, JSCE, No.544/V-32, pp. 141–154, 1996.8.Google Scholar
3
Sudou, K., Niunoya, S., Konishi, K., Fujiwara, A. and Watanabe, K.: A Study on the Permeability Test by Means of the Intermittent Ventilation Test Method, Proceedings of the Thirty-first Japanese National Conference on Geotechnical Engineering, Vol. 2, The Japanese Geotechnical Society, pp.2089–2090, 1996.7.Google Scholar
4
Watanabe, K., Sakuma, H., Noguti, Y. and Arai, N.: Field Measurement of the Spatial Variability of Evaporation Rate along some Fractures on a Tunnel Wall, Proc. Flow Heterogeneity and Site Evaluation, OECD/NEA, pp.269–278, 1990.Google Scholar
5
Konishi, K., Iriya, K., Takeda, N., Fujiwara, A., Ito, Y. and Tsuji, Y.: An Experimental Study on Permeability of Concrete Silos for Performance Assessment of Radioactive Waste Repositories: Proceedings of the 1993 International Conference on Nuclear Waste Management and Environmental Remediation, Vol. 3, ASME, pp.505–508, 1993.9.Google Scholar