Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-23T14:19:36.058Z Has data issue: false hasContentIssue false
  • English
  • Français

Atomic Force Microscopy Probe with Integrated Loop and Shielded Leads for Micromagnetic Sensing

Published online by Cambridge University Press:  01 February 2011

D.P. Lagally ,
A. Karbassi ,
Y. Wang ,
C.A. Paulson  and
D. W. van der Weide
D.P. Lagally
Affiliation:
Materials Science Program
A. Karbassi
Affiliation:
Department of Electrical and Computer Engineering, University of Wisconsin-Madison, Madison, WI 53706
Y. Wang
Affiliation:
Department of Electrical and Computer Engineering, University of Wisconsin-Madison, Madison, WI 53706
C.A. Paulson
Affiliation:
Department of Electrical and Computer Engineering, University of Wisconsin-Madison, Madison, WI 53706
D. W. van der Weide
Affiliation:
Department of Electrical and Computer Engineering, University of Wisconsin-Madison, Madison, WI 53706
Get access

Abstract

The effort to produce an instrument that can achieve high spatial resolution, nondestructive, surface and sub-surface imaging for a variety of materials comes with many challenges. One approach, magnetic resonance-force microscopy (MRFM), lies at the nexus of two sensitive technologies: magnetic force microscopy (MFM) and magnetic resonance imaging (MRI). MFM uses a magnetic tip in a standard atomic force microscope (AFM) to obtain magnetic information about a surface. A difference in the magnetic moments of surface atoms in different regions on the surface varies the cantilever resonance. MRI, on the other hand, uses the spin states of magnetically biased atoms to differentiate between chemical species.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 872: Symposium J – Micro- and Nanosystems—Materials and Devices , 2005 , J18.9
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1]. Sidles, J.A., Garbini, J.L., Bruland, K.H., Rugar, D., Zuger, O., Hoen, S., Yannoni, C.S., “Magnetic Resonance Force Microscopy,” Rev. Mod. Phys., 67, 249 (1995).Google Scholar
[2]. Marohn, J. A., Fainchtein, R., Smith, D. D., “Mechanical Modulation of Sample Magnetization in Magnetic Resonance Force Microscopy,” J. Appl. Phys., 86, 4619 (1999).Google Scholar
[3]. Rugar, D., Budakian, R., Mamin, H. J., Choi, B. W., “Single Spin Detection by Magnetic Resonance Force Microscopy,” Nature 430, 329 (2004).Google Scholar
[4]. Agrawal, V., Neuzil, P., Weide, D. van der, “A Microfabricated Tip for Simultaneous Acquisition of Sample Topography and High-frequency Magnetic Field,” Appl. Phys. Lett. 71, 2343 (1997).Google Scholar
[5]. Kanda, M., “Standard Probes for Electromagnetic Field Measurement”, IEEE Trans. Antenna and Propagation, 41, 1349 (1993).Google Scholar
[6]. Sarid, D., Scanning Force Microscopy: with Applications to Electric, Magnetic, and Atomic Forces, Oxford University Press, New York, 1991.Google Scholar