Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-29T09:29:11.118Z Has data issue: false hasContentIssue false
  • English
  • Français

Accelerated Corrosion of Stainless Steels in the Presence of Molten Carbonate below 923 K

Published online by Cambridge University Press:  10 February 2011

Ken-ichiro Ota ,
Katsuya Toda ,
Naobumi Motohira  and
Nobuyuki Kamiya
Ken-ichiro Ota
Affiliation:
Department of Energy Engineering, Yokohama National University79–5 Tokiwadai, Hodogaya-ku, Yokohama 240, Japan
Katsuya Toda
Affiliation:
Department of Energy Engineering, Yokohama National University79–5 Tokiwadai, Hodogaya-ku, Yokohama 240, Japan
Naobumi Motohira
Affiliation:
Department of Energy Engineering, Yokohama National University79–5 Tokiwadai, Hodogaya-ku, Yokohama 240, Japan
Nobuyuki Kamiya
Affiliation:
Department of Energy Engineering, Yokohama National University79–5 Tokiwadai, Hodogaya-ku, Yokohama 240, Japan
Get access

Abstract

The high temperature corrosion of stainless steels (SUS316L and SUS310S) in the presence of molten carbonate [(Li0.62K0.8)2CO3 and (Li0.52Na0.48)2CO3] has been studied in a CO2-O2 atmosphere by measuring the weight gain of the specimens.

The corrosion of SUS316L significantly depended on the reaction conditions. With the carbonate coating (both Li/Na and Li/K carbonates), severe corrosion occurred during the initial period of the corrosion test below 923 K, especially around 823 K. The initial severe corrosion was a local corrosion which produced through holes in the metal specimens and occurred more clearly at low Pco2 with the Li/Na coating than with the Li/K coating. The corrosion became more severe at higher CO2 pressures and lower O2 pressures. In a pure CO2 atmosphere (without O2), the corrosion rate significantly increased at 823 K. The steel was corroded uniformly at that time.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 496: Symposium Y – Materials For Electrochemical Energy Storage & Conversion II… , 1997 , 231
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kamiya, N., Yagi, Y., Ota, K-I., 46th ISE Meeting Abstract No.15–41 (1995) Xiamen, China.Google Scholar
2. Ota, K-I., Corrosion Engineering, 37, 135 (1988).10.3323/jcorr1974.37.3_159Google Scholar
3. Tanimoto, K., Yamaguchi, M., Kojima, T., Tamiya, Y., Miyazaki, Y., Proc. 2nd IFCC p3. (1996) Kobe, Japan.Google Scholar
4. Fujita, Y., Nishimura, T., Hosokawa, J., Urushibata, H., Sasaki, A., 3rd FCDIC Fuel Cell Symposium Proc. p. 154 (1996) Tokyo, Japan.Google Scholar
5. Shores, D.A., Pischke, M.J., Proc.3rd Intnl. Symp. Carbonate Fuel Cell Technology, PV93–16, the Electrochemical Society, p.214 (1993).Google Scholar
6. Nakagawa, S., Isozaki, J., Kihara, S., Boshoku Gijutu, 36, 438 (1987).Google Scholar